View Full Version : Xtreme JK Tech
- Roll cage / front bars for JK
- Engine swap
- small block in JK?
- SR8 6.1 V8 - Can it be mounted in a JK?
- 6.1 Hemi
- 60's, anyone?
- ATLAS II 4spd on the way!!! :)
- Engine swaps
- D60's? Anyone selling them yet?
- 6.4 Hemi In JK
- Hemi swap
- Engine Swap in JK?
- Another Hemi 6.1 Swap
- Lets Talk Welders....
- DYNATRAC PROROCK60 for JK
- Portal axles for JK ?
- B Pillar Removal
- Atlas 4speed Installed!!!
- SOLID Front Axle Hub Conversion Kit - Available & Installed!!
- cutting and bending steel for fab work?
- Hemi Conversion.
- 5.7 vs 6.1-help
- Coilovers
- Diesel Conversion
- Dynatrac ProRock 60s
- Solid JK SpynTec Conversion
- Hemi swap?
- MOpar D60 offered for Jeep JK
- Mopar Dana 60
- NV241 OR rubi transfer case or a atlas?
- PRESS RELEASE - Off Road Evolution C2 Front Axle Reinforcement Gussets
- Custom extended Roll Cage anyone?
- Coil Over System,... Can Anyone Explain the Benefits?
- 5.7 litre hemi
- People with Atlas II
- Hemi conversion in details
- Sports Cage Alternatives
- Hemi 6.1 swap "kit"?
- AEV JK Hemi Kit
- Portal conversion for the JK
- Motor swap suggestions and questions.
- Help buying welder
- Has anyone installed Dana 60's yet?
- Engine swap
- Tranny for Hemi 6.1 swap
- Project-JK Gets Off Road Evolution EVO-flex - Part 1: Front Coil Overs
- Atlas T-Case
- Engine build?
- Engine swap questions
- Project-JK Gets Off Road Evolution EVO-flex - Part 2: Rear EVO Lever
- My Motor Swap build
- Project-JK EVO Flex w/Short Arms RTI Scores - Read 'em and Weep!!
- 5.7 Hemi to be a 6.1 - 6.4
- Solid dana 60 or solid dana 44
- Atlas Four Speed T/C
- Teraflex LA upgrade kit, EVO coilovers, and 37's on my Unlimited Rubi
- Custom Rollcage
- Solid Axle industrys 60's- pictures!
- HEMI conv. question...
- Atomic Axles??
- Picture Request.... roll cage
- Diff Oil for Dana-60
- Another coilover question
- TeraFlex CRD60R anyone?
- PRESS RELEASE: TeraFlex Jeep JK Wrangler CRD60R Rear Axle
- SOLID D60 Setup
- Off Road Evolution
- suspension
- EVO Double ThrowDown UAE
- 4WS JK Hemi Conversion Headers Problem
- Forget the Hemi !!!
- Atlas Transfer Case 2 or 4 speed
- TeraFlex 60 vs. Currie Rock Jock 60 vs. Dynatrac
- Welder question
- Tcase question, BUT need to be very knowledgeable for this one
- question for those who have installed atlas T/C
- Who does hemi conversions?
- Custom Engine Skid Armor
- Modified Rear lower control arm mounts cutoff/skids
- Hydraulic winch mod. With non p.s pump
- Air Shocks Vs. Coilovers
- Questions after the hemi conversion
- Viper V10 8.3L in a JK?
- Fabtech Front 5" Coilover Conversion Kit
- Evo Coilovers with lift kit
- Evo Double Throw Down???
- convert to 5x5.5
- I got a V8
- HEMI Experience
- 4ws hemi swap
- front 12" evo coilovers worth it?
- EVO coilovers and lever on Dynatrac Axles
- Front Bumper Build
- 609 Axle
- salvaged Dana 60's - JK brackets?
- LS series chevy motor
- Welding up the Dana 30
- building a rear bumper/tire carrier and need help.
- Diesel conversion
- Steel tubing...where?
- heavy mods
- EVO 14" coilovers on a 2 door JK?
- cummins diesel
- URGENT HELP D60 Steering
- full size axels
- EVO 12" Front coilovers, Teraflex LA kit, Teraflex high steer kit & Teraflex 4" coils
- Next Stage of the Build
- Brakes not working
- Lateral protection
- EXO cage JK?
- Dana 60
- 4.7 swap?
- Vibrations Help Reqd
- Currie D60 & JE REEL
- one more engine swap question
- Pacific Northwest Hemi conversion
- Hemi is in the next day...
- SOLID 60 Finally Installed
- Welding Rod for Gussets
- Hemi Hype
- Teraflex CRD60
- Hemi or chevy engine?
- Currie Rock Jock Dana 60 and suspension help
- EVO front coilover problem
- Bumper Design and CNC Plasma Cutting
- 4.2 inline gm in jk
- Suggest MIG welder for rock rails, bumpers, etc...
- Real world HEMI mileage vs 3.8
- More on the roll cage front
- 4.7 to our 6 speed
- Fabbing Bumper ... any advice
- 4.1 for non rubicon mabey
- Hemi running on the dyno today
- Need Help with an Atlas
- 5.7 hemi
- Welders...
- Joining the Hemi Club
- Screamin Lizard Customs Moab Ready
- Bumper air tank painting???
- Is it a Hemi
- Hemi Swap
- how to weld OR how not to fry your computer
- built front bumper w/ winch reciever
- dana 60's and ABS Tone ring
- Dana 60 builds
- hemi year models?
- Srt10??
- Getting ready to do the Hemi
- Quick welding question
- Dana 50... Anybody ever use one?
- Anyone running the RockKrawler Coilover Kit?
- Hemi transmission question
- 3.8L Stroker?
- Fab your own bumpers?
- Hemi Dual Exhaust System
- Calling all the Hemi jks
- Need some basic welding tips
- HEMI Conversion????????????!!!!!!!!!!
- Any one running a non-Chrysler engine?
- who makes front dana 60 to use OX locker with?
- Planning for HEMI, need some help.
- Hemi Install prices...
- 4BT cummings in a JK
- HEMI Engine Skid Plate?
- Hemi Engine Power
- C gussets
- full float D60
- Upgrading to ProRock 60s
- Summer Hemi
- Do I really need D60s?
- Hutchinson Rock monsters on D60s
- Best Muffler for a Hemi Swap?
- Manual to Auto
- Engine swap options
- Rock Sliders.. Fabricated?
- no crank on a hemi conversion project
- auto swap
- Why not a 4.7L V8 PowerTech?
- 3.8L V6 to 6.1L V8
- Anyone...
- jk hemi engine mounts..
- Where to Find Custom Fab Parts
- Custom Tire Carrier, Your Opinion Please
- Screamin lizards help!
- Another V8???
- Making a bracket
- Cage Reinforcement
- Atlas 4 speed
- 5.7L Hemi Dyno Results
- inspiration for my new rear bumper build
- towing with the hemi
- JK hudraulic assist steering? PSC?
- What gears to use with a hemi?
- 440 HEMI Crate Engine
- Any JK Unit Bearing Issues with 37's and 40's
- Skid plates for a JK with a Hemi?
- Vendor's Dana60 Setups
- Factory roll bar/roll cage good enough for triangulation and support?
- Making a homemade bumper
- Dana 60 in the front?!
- Which track bar with rock jock front
- Bracket Location Questions
- Hemi into a CRD?
- Hemi 5.7 how much?and where?
- Real World Performance Specs for 5.7 and 6.1L Hemi JK's?
- What a Wife
- Motor tranny swap
- Hemi wiring harness
- Dana 60's fr- losing turn radius?
- Hemi 5.7 or 6.1?
- thinking of bolting a ls2 chevy into JK
- Spyntec Locking Hub?
- Atlas 4-speed
- locker for dana 60s
- Lost My Job..Considering a project..not sure if its possible.
- how much can my NSG370 tranny handle?
- rock crawler 8 inch rear axle stretch
- Anyone else blown up their Dana 60 yet?
- What would it take; rubicrawler on manual
- Wrangler roll cage info needed ?
- ABS and brackets for old Dana 60
- 5.7 hemi swap, which shifter for auto?
- JK hemi headers/tuning
- hemi swap 6 speed info?
- Will this Hemi work?
- Atlas 3.8 or 4.3:1
- manual tranny for hemi
- Project 5.3 ls1 in Jeep JK... need help!
- D44's, 35" wheels and a Hemi ??
- Looking for Hardware
- mag hytech
- Dana 60 Axle tube outer seal
- soft top with a custom cage ... been done?
- Is anyone running a dual battery set-up with a Hemi
- check out my project
- Anyone cut chop the front frame rails? Approach angle..
- 37's plus Hemi equals 60's?
- A real gas pedal....
- Finally got Fabin'!
- diesel??
- Another axle question.
- Hinge pin diameter??
- Off Road Evolution Evo Lever Rear Coil Over System
- Dana 60's
- F250 axles
- Instal Hemi OR Ford 302
- mag hytech pan fits
- VIDEO: Building a Dynatrac Pro Rock 60 Front Axle - How it's Made
- Welding on a Dana 44 axle.
- How many hours to install a hemi
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.