Front Speaker Wiring

[Mykal1999]

I am about to install my AVIC-D3. It states in the manual that the unit cannot be hooked up to 2ohm speakers. It seems that the stock jk speakers are indeed 2ohms. I did not plan on replacing these speakers right away.

How are the front 6.5" driver and tweeter wired? Are they both 2ohms or is there a 4ohm crossover?

Thanks

[Mykal1999]

I am assuming that the tweeter and the driver are 2ohms each and wired in series to a crossover which would make the load on the head unit 4ohms. Am i correct??