D60's? Anyone selling them yet?

[RubberDucky]

I'm just curious if anyone is making these for the JK yet? I know there were some (even unimog axles) for the TJ.

Seth.

[Woods]

I know that Offroad Evolution has installed Dynatrack 60's on a few JK's.:eek2:

[Northridge4x4]

Currie is working on them right now.

David

[David @ Currie Ent.]

Currie is really close on the rear 60. Should have ready to go by September with all the electronic stuff ready to bolt in.

Features:

Rock Jock Housing
All brackets are made from ASTM572 Grade 50 steel
Adjustable Track Bar Bracket
Adjustable Lower Shock Mount
Adjustable Upper and Lower Control Arm Mount
Set 80 Bearings
35 Spline Axles
Re-use factory brakes (less cost to you)
Your choice of differential and gears.


http://currieenterprises.com/moab2007/IMG_2975.jpg

[Robar]

How about the front?

[Jake_Blues]

Chrysler puts a D60 in the J8, the Egyptian military version of the JK, but they are mounted on leaf springs. I doubt they put any of the electronic crap on them, either.

-E

[Audiophiliac]

Nice looking kit there Currie. :) I will be anxiously awaiting this release....hopefully the front kit will follow shortly after.

[WestGaParrotHead]

I wonder if it would be possible to buy an export military of the jeep (ie J8).......

[Evolution]

HERE IS OUR SHOP RIG WITH DYNATRAC PRO ROCKS 60'S. THIS IS THE FIRST JK WITH FRONT AND REAR PRO ROCKS WITH ALL SPEED SENSORS WORKING. WE ARE INSTALLING OUR THIRD SET NEXT WEEK.

http://www.offroadevolution.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=1327

[Piginajeep]

wow thats one sick looking JK...

[WestGaParrotHead]

wow thats one sick looking JK...


hahaha ditto

I want those handles and that billet fair lead

[Northridge4x4]

wow mel that thing is sexy!

[AddictedToJeeps]

any idea on how much the bolt in dana 60s will run for out rigs

[Northridge4x4]

Just a guess but around 4500 for the rear and 7500 for the front with all the goodies.

David

[jeepik]

HERE IS OUR SHOP RIG WITH DYNATRAC PRO ROCKS 60'S. THIS IS THE FIRST JK WITH FRONT AND REAR PRO ROCKS WITH ALL SPEED SENSORS WORKING. WE ARE INSTALLING OUR THIRD SET NEXT WEEK.

http://www.offroadevolution.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=1327

c'mon Mel

thats not cool, how about more pics for us???

[jeeper]

WOW! :crazyeyes: That is OUTstanding!

[RubberDucky]

Currie is really close on the rear 60. Should have ready to go by September with all the electronic stuff ready to bolt in.

Features:

Rock Jock Housing
All brackets are made from ASTM572 Grade 50 steel
Adjustable Track Bar Bracket
Adjustable Lower Shock Mount
Adjustable Upper and Lower Control Arm Mount
Set 80 Bearings
35 Spline Axles
Re-use factory brakes (less cost to you)
Your choice of differential and gears.


http://currieenterprises.com/moab2007/IMG_2975.jpg

That is hot. I want one!

[David @ Currie Ent.]

any idea on how much the bolt in dana 60s will run for out rigs


The rear Rock Jock III 60 will sell for $3,250.00 ready to bolt in.

Above pricing includes:

Detroit Locker
Your Choice of Gear Ratio
35 Spline Axles with ABS Sensor Tone Ring
Set 80 Bearings
All brackets
Yoke
Steel Cover

[David @ Currie Ent.]

How about the front?

We are also working on 2 different versions of the front Rock Jock 60. (working on pricing)

The 1st version (should be available by October) will have 35 spline inner axles, 32 spline outter axles. The factory brakes, hubs and knuckles will be used (less cost to you). All new brackets (steering stabilizer relocator included) See pic.

The 2nd version (available early 08) will have 35 spline inner and outter axles, new knuckles and hubs. Wheel bolt pattern will be available in 5 on 5.5 and 6 on 5.5. Locking hub or drive flange compatible. More to come!!



1st version

http://currieenterprises.com/moab2007/IMG_2492.jpg

[David @ Currie Ent.]

Is that a prototype lift of yours or someone else's? Just curious, I am waiting for all the options I can...


http://currieenterprises.com/moab2007/IMG_1445.jpg


It is a Currie Lift, waiting on a few small parts. should be available by the end of the month.

Features:

Designed to clear 37's (minor triming necessary)
11" rear travel
9.5" front travel
Adjustable control arms with Johny Joints
Dual rate springs
Rear spring retainers
Track bar relocator brackets (bolts and welds on for strenght)
Front and Rear shock relocator
Bump stops
Brake lines
System was designed using the new Rancho RS9000XL 2.75" dia. body


Options:

11" front travel (requires smaller diameter driveline)
Adjustable track bars with Johny Joints
Front and Rear Antirock Off-Road Anti-Sway Bars
Walker Evans Shocks


We'll be doing a press release as soon as it is on the shelf.

[KiltedJK]

All this is enough to make one go out and buy a powerball ticket (currently at $210 million)

[00pumpkin]

Wonder how pissed the computer would get if you decided to yank all the sensors and run junkyard axles?

[WestGaParrotHead]

Wonder how pissed the computer would get if you decided to yank all the sensors and run junkyard axles?


Hell mine seems to feak out when I brake a bit hard into a turn....... damn ESP AND ABS......

[FRDesign]

Just a guess but around 4500 for the rear and 7500 for the front with all the goodies.

David
holy shit!

My whole Damn Truck was $2500 and it has a D44 and a 14 Bolt FF(One of the best Rear ends ever.)