Solid Axle industrys 60's- pictures!

[Piginajeep]

I got a couple pictures from Solid Axle of the new 60's that are shipping.

http://www.jk-forum.com/attachment.php?attachmentid=14238&d=1224218450

http://www.jk-forum.com/attachment.php?attachmentid=14239&d=1224218480

http://www.jk-forum.com/attachment.php?attachmentid=14240&d=1224218487
wheel speed sensor
http://www.jk-forum.com/attachment.php?attachmentid=14241&d=1224218494

http://www.jk-forum.com/attachment.php?attachmentid=14242&d=1224218500

Solid Axle Industries, LLC.
12356 Mahoning Avenue
North Jackson, OH US
44451

toll free:
888.290.AXLE (9-5:30 Mon-Fri EST)
phone:
330.538.9791
fax:
330.538.9793

[WitchKing]

:crazyeyes:
HO-LEE-CRAP!!!! So nice!!!!

Will the 3.8L be able to handle those?

[Piginajeep]

http://www.jk-forum.com/attachment.php?attachmentid=14243&stc=1&d=1224218913

[Piginajeep]

:crazyeyes:
HO-LEE-CRAP!!!! So nice!!!!

Will the 3.8L be able to handle those?

5.38 gears, it should do fine. Theres plenty of JK's running 60's already. Hell if the old TJ's could run them, so can the JK

[Brad2893]

Wow :jawdrop:

[2drREDROCK]

Awesome how much??
How much stronger is it then the Dana44?
Gear size?
Just curious:yup:

[Piginajeep]

Awesome how much??
How much stronger is it then the Dana44?
Gear size?
Just curious:yup:

its like comparing a toothpick to a baseball bat. Theres a hugh difference between the thickness of the housings alone. If I can get pictures of two side by side, I'll get them posted.

I dont know the price, I believe (ballpark) the rears are just over $3,400. Call them up and ask.

[JK07]

Thats exactly what I am getting SOLID Dana 60 Front & Rear cant wait for another 4 weeks :ya:

[2drREDROCK]

3,400$ don't think its worth it sorry just my opinion,I'll blow apart my Dana44 first:yup:

[pearl-drum-man]

Awesome! I missed the update, I assume you're getting your JK fixed? If so what tire size?

[Piginajeep]

Awesome! I missed the update, I assume you're getting your JK fixed? If so what tire size?

no these are not mine, just a customers

I still dont know whats going on with my JK, the insurance is dicking around.

[Piginajeep]

Well.. Stand your ground and don't back down on your JK.. Get every penny you can from them...


One question.. Are the Solid D60s bolt pattern the same as the JK or are they the 5.5x5 bolt pattern?

5x5.5 you can't go 5x5 and fit hubs, the center hole is to small.

[RDY4RKS]

Those look awesome. Thanks for putting up pictures of them. When I swap to 60's I am definitely going with the SOLID's.

[tgrt]

Man those look good. I don't think the price is all that bad. Now I imagine the price on the front is going to be scary as hell.

[Piginajeep]

Man those look good. I don't think the price is all that bad. Now I imagine the price on the front is going to be scary as hell.

i'm sure, but you would never have to worry about breaking.

[Jeepin_Erik]

Me wanty!!!!!!!!!!!

[GOCACHN]

Man, those are NICE!

[CLACKEY(_!_)]

I'll take TWO! :thumbsup:

[x No Compromise Offroad x]

Not to brag:synister::bleh:.....but here are mine, just arrived at Carolina Truggies Thursday!!!!:ya::ya:


http://i150.photobucket.com/albums/s107/fallenangel1006/180.jpg

http://i150.photobucket.com/albums/s107/fallenangel1006/181.jpg

[x No Compromise Offroad x]

http://i150.photobucket.com/albums/s107/fallenangel1006/182.jpg

[x No Compromise Offroad x]

They ship them in a coffin so they already have something to put you in when your wife finds out how much you spent!!!

[Piginajeep]

very nice, I take it they are welding the brackets and setting up the gears.

[x No Compromise Offroad x]

yea....cost less that way:wink:

[JK07]

I am doing the same upgarde D60 front and rear..

What are your plans for the drag link and Tie Rod? I think we have to upgrade to something as rock krawler heavy duty bec i dont think the stocks will be able to handle our 60s let me know so i go the same way

yea....cost less that way:wink:

[Solid Axle]

Thanks for all the great comments so far. We put a lot of time and effort into this project. These Solid JK 60's are going to be the center of many JK's out there and we thank you for all the orders so far. :thumbsup:

Key features:
-Featuring Solid Axles exclusive SpynTec technology keeping your ABS and ESP functioning properly. Utilizes stock sensors.

-12" of ground clearance with 37" tires (Pro-Rock is 12.125" and is $1,000's more).

-Forged "C" ends.

-Forged Hubs and Spindles

-Chrome-Moly axles stock both front and rear (option from other mfg's).

- and much much more.

We will have more info for you after SEMA:D

Mike

[ssmathis]

Very impressive. No way to get that one by the spouse.

Scott