Tera Quick Disco's

[nam6869usmc]

Something like this just might help a few guy's, I know I learned most everything from this forum.
These are what I purchased & Installed(Teraflex Quick Disconnect's)
Ordered from "Quadratec". You actually get 2 extra "Pins" with kit, not shown in picture.http://img.photobucket.com/albums/v647/nam676869/qds-1.jpg
Remove Stock Link's ..just Unbolt Both Ends & Remove......
Bolt both Tera Quick Disco Links top Bolt only ....
Bolt these Pin's(Shown in Pic below) to Bottom hole on both sides.....
http://img.photobucket.com/albums/v647/nam676869/DSCF0016-2.jpg

Picture of Teraflex Quick Disco Link Connected.
http://img.photobucket.com/albums/v647/nam676869/qd1.jpg

Pulling "Lock Pin" out....I bought these at Lowe's & they lock securely( better).
http://img.photobucket.com/albums/v647/nam676869/DSCF0041-2.jpg

Lock Pin removed & now removing the Washer
http://img.photobucket.com/albums/v647/nam676869/DSCF0040-3.jpg

Pull Swaybar off Pin.. now you are Disconnected.
http://img.photobucket.com/albums/v647/nam676869/DSCF0039-3.jpg

Disconnect other Link & pull Swaybar up an Park both left & right side links on Parking Pin.
http://img.photobucket.com/albums/v647/nam676869/DSCF0019-2.jpg

If you are not perfectly level there will be a slight mis-alignment when trying re-connect them, I just put my knee ((while squatted down)) under the end of the bumper, it lifts very easily to so you can get the proper alignment to get it on. Done.

[luisjg]

just what I needed to see,,thanks for this!

[nam6869usmc]

just what I needed to see,,thanks for this!

Your more than welcome,.....I'm sure, in time you'll put something on here that'll be a big big help for someone else. Believe me, I'm still in a learning curve, been out of it since my 79 cj7.

[luisjg]

yeah,,this are my first disco's ,,so did not have any idea as the intructions ara black! :sad: but this pics did the trick,,they are installed,,,! now,,
im thinking i may need front brake line extentions though,,,have the teraflex
2.5 BB on it.

[kb7our]

Is any drilling required to add a stowage location whilst disconnected?

[muddpuppy01]

no you unbolt the front body bolt then install parking pin then put back bolt

[kidjeep]

Cool, I knew I saw this on the forum. I just got my discos today and NO instructions. I couldn't remember where the "park" bracket bolted onto.

Off I go to install...

[mrsig]

Cool thanks I will order them now I know how easy they work.
Thanks

[kidjeep]

Just got my discos installed and it maybe took an hour. Also wanted to let anyone know who may be considering the Teras that they have a new safety pin that looks a little more secure than the one pictured(from Tera in top picture) in this write up. I tested it out and it is easy to disconnect and reconnect. I like the Teras because they have a place to park with no loose pieces when disconnected. I hate zip ties and bungies!

[armycop]

Just got my discos installed and it maybe took an hour. Also wanted to let anyone know who may be considering the Teras that they have a new safety pin that looks a little more secure than the one pictured(from Tera in top picture) in this write up. I tested it out and it is easy to disconnect and reconnect. I like the Teras because they have a place to park with no loose pieces when disconnected. I hate zip ties and bungies!

Can you post a pic of the new pins?

[kidjeep]

Can you post a pic of the new pins?

I'll try to do that tomorrow...

[kidjeep]

I'll try to do that tomorrow...

My first attempt at posting pic so here goes, this is the retaining pin for the lower sway bar that came from Tera this week. It looks pretty secure to me and can't imagine it coming out during normal paved road use.

http://my.project-jk.com/data/500/thumbs/terapin.JPG (http://my.project-jk.com/showphoto.php?photo=9416)