2-Door- PUREJEEP Rocker install

[Piginajeep]

If you missed the install on the Front page check it out..
http://project-jk.com/jeep-jk-write-ups/purejeep-2007-jeep-jk-wrangler-2-door-rocker-guard-installation-write-up

Eddie did a real nice job making sense of my email...

I must say I was impressed with the protection on the trail. In northeast Ohio, its all tree's and rocks, they did a nice job of pushing the small tree's away from the paint. And works very well as a pivot point around them. On the rocks it did very well. Of course with the lift and tires, They didnt get much abuse.

http://project-jk.com/images/writeups/pj-2d-rockers/P1012659.jpg

[Old_School]

I don't see the rails listed anywhere including the PJ website. Where can I get them?

[Piginajeep]

I don't see the rails listed anywhere including the PJ website. Where can I get them?

Mine are pre-production.

Far as I know they plan on making them. I just dont know when. I was told they wanted to get the Rear bumper shipping before these were released. Something could have changed that was about 3 months ago..


They'll be available from anyone that sells PUREJEEP..

4WheelDrive Hardware
Northridge4×4
Quadratec

[Old_School]

You tease!!!

[wayoflife]

Mine are pre-production.

Far as I know they plan on making them. I just dont know when. I was told they wanted to get the Rear bumper shipping before these were released. Something could have changed that was about 3 months ago..


They'll be available from anyone that sells PUREJEEP..

4WheelDrive Hardware
Northridge4×4
Quadratec

Yup, what Piginajeep said. I talked to PUREJEEP yesterday and was told that they are trying to release their rear bumper first and then the rocker guards should be coming out shortly thereafter.

[AZCA jeeper]

Mine are pre-production.

Far as I know they plan on making them. I just dont know when. I was told they wanted to get the Rear bumper shipping before these were released. Something could have changed that was about 3 months ago..


They'll be available from anyone that sells PUREJEEP..

4WheelDrive Hardware
Northridge4×4
Quadratec

Literal Translation using inferred feelings
(que the sarcasm) "Mine are pre-production, which means I'm special and your not. HA HA HA :rotflmao1: "

Just kidding.


Seriously, those looks like sturdy rails. Will there be a difference in time when they come out based on which JK you have? (ie will you have to wait longer if your have an unlimited compared to a 2dr?)

[Piginajeep]

Offroad evolution are running these on the 4-door, it looks like the same setup to me.
http://project-jk.com/jeep-jk-news/the-ultimate-e-ticket-ride
More pics
http://project-jk.com/wp-gallery2.php?g2_itemId=7708&g2_page=1

http://project-jk.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=7852&g2_serialNumber=2
http://project-jk.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=7804&g2_serialNumber=2

[TEV]

What ever happened to the ones that looked like this? Those look ok but I was really looking forward to these and how they came up above the door sil. Ill be disapointed if they don't make them. Maybe poison spyder or rokmen. :rollingeyes:

http://www.purejeep.com/prodimages/PJ3001-LRG.jpg

[Piginajeep]

thats just another design, they planning on making them.. I just was'nt ready to drill into my tub yet....

Thats more for the hardcor rockcrawler...:yup:

[degenerate]

thats just another design, they planning on making them.. I just was'nt ready to drill into my tub yet....

Thats more for the hardcor rockcrawler...:yup:

how about now that you've already gashed it anyways? :rotflmao1:

[armycop]

Any ballpark estimate on the price of those yet?

[HappyCurmudgeon]

What ever happened to the ones that looked like this? Those look ok but I was really looking forward to these and how they came up above the door sil. Ill be disapointed if they don't make them. Maybe poison spyder or rokmen. :rollingeyes:

http://www.purejeep.com/prodimages/PJ3001-LRG.jpg

Yup, i like those too.
Poison Spyder has some i believe in prototype form. You can see them on their rig here if you look close, they are body colored:
https://www.spydercustoms.com/RockerKnockers/JK_lg.jpg

[Piginajeep]

how about now that you've already gashed it anyways? :rotflmao1:

I'm definetly ready if they want me to test a set out!!:yup:

[huskynox]

Piginajeep,

Have you bashed these bars yet?

Just wondering how they hold up. The mounting doesn't look as good as Shrockworks, but the asthentics look a lot better because they match the body.

Thanks

[Piginajeep]

I came down on them hard on my last trail ride on some rocks, I chipped the paint off them but thats about it. They seem very sturdy, They work good as a pivot point as well...

[huskynox]

I came down on them hard on my last trail ride on some rocks, I chipped the paint off them but thats about it. They seem very sturdy, They work good as a pivot point as well...


Any inside info as far as when they'll be available?

Thanks~

[Piginajeep]

well mine were prototypes, They told me they were going to start working on them after the rear bumpers were shipping..

we'll I'm still waiting on the rear bumper.. SO i dont really know when. If I hear something I'll post.

[matthew2000tx]

Are these still for sale?? I can't find them at any vendors?