Forum: JK Write-Ups

I washed my Jeep today for the second time. The mirrors drip water for days and leave spots all over the side of the jeep. I read a thread about...

I am usually scared that I am going to chip the paint on my hinges and cause even more rust than there is already as I try to align the hinges when...

I know that this write up has been done before, but I had some unanswered questions when I went to do mine, so here is my write up: The parts I...

If you've experienced DTC P0406 (and probably others, as well), then you may have a bad EGR valve. This happened to me at about 30K miles. Although...

First of all, HUGE thanks to Yates, Kevin and the guys at OR-Fab for hooking me up with these awesome rails and armor. The quality is simply amazing,...

http://project-jk.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=135481 Airing down your tires for the trail is an essential part of...

first things first. as this is a current project i will be updating as i go. i will be using the Upol raptor liner. google "upol" for more info or...

Several people have PM'd me asking for help in doing a riveted stubbie conversion. Items needed: manual rivet gun, 3/16 drill bit and drill, a new...

since my top has been off since the morning after it came home, and will be going back on with winter coming, I thought I would get rid of the white...

OK folks, like many others out there I did not want to do the 1" bodylift because of the unsightly gap above the rear bumper. Have no fear as I have...

I know Iv seen threads on different methods of insulating the hardtops, but I cant seem to locate any of them. For those that have done it, what did...

PICTURES FOR THIS "MOD" HAVE BEEN REPOSTED ON PAGE FOUR- WITH INSTRUCTIONS ON HOW I DID IT. (sorry that it took me so ling to repost them, but I...

Well the temperature is warming up so it's that time of year to take the hardtop off on my 4door JK Rubicon. My goal was to create a hardtop...

Because my DW posts are buried in other members' threads and in some PMs, here is a thread of its own. I will also include info on non-DW shimmies...

Adjusting the back seat angle to the rear June 18, 2008 Parts: Quantity (25) ½” Galvanized flat washers...

Center Console Switch and Power Panel Writeup http://gallery.me.com/mmccurdy/100801/DSC_0002/web.jpg?ver=12697511150001 Background So I ran...

On my 2 door Rubicon I just finished installing a TeraFlex 2.5” Spring Lift with adapters (to keep my good shocks). There’s actually a lot of...

Hey everyone, I recently purchased a Harken 4-point Hoister to install in the garage. The product number is 7803.B. You can purchase it at...

THE INSTALL WAS FAIRLY SIMPLE. FIRST, I PULLED OFF THE HEAD RESTS AND INSTALLED THE COVERS. SLIPPED RIGHT OVER THE STOCK HEAD REST. THEY ATTACHED...