2008 jeep wrangler rubicon very built
10-18-2014, 07:58 AM
#1
JK Enthusiast
Thread Starter
Join Date: Mar 2009
Location: Topeka, IN
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
2008 jeep wrangler rubicon very built
2008 jeep wrangler rubicon The time has come to look at getting rid of my baby. It has 77850 miles on it. I have done a lot of work on it to get it built how I wanted it. Here is a list of all the mods. The axles are fresh with maybe 2000 miles on them since the rebuild and install. It does have some light scratches and a dent in the lower passenger inner fender.
Standard equipment
Manual Cruise control
A/C
Everything works as it should
Front axle
1979 ford dana 60 completely rebuilt
ARB locker with 5:38 gears
Custom built brackets out of 1/4" steel
Custom built steering with 7/8 ruff stuff heim joints
1.5" sold aluminum tie rod
1.5" PSC steering ram
Chromoly 35 spline outers
Yukon locking hubs
Ruff stuff 3/8" thick diff cover
Rear axle
1988 & older 14 bolt axle completely rebuilt
ARB locker with 5:38 gears
Disc brake conversion
Custom brackets and truss
Undercover fab diff cover
Pinion guard
Suspension
RRK 2-5/8 12" travel coilovers up front
Fox 2.0 14" travel coilovers in the rear
Rock krawler arms front and rear
The rear is stretched 8"
Armor and bumpers
Custom built rear corner armor
Custom built rocker skins
Poison spyder BFH front bumper
Gen right aluminum tire carrier
Interior
Rock Hard roll cage
Spod switch panel
Master Craft Baja RS seats up front and matching rear seat cover
Crow racing harnesses with detachable harness bar for shoulder harnesses
Pioneer CD player
Polk audio speakers
Misc.
Superwinch 9k winch
10" rigid light bar
Rigid dually back up light
Viair dual compressor under hood. (Air up all 4 tires in 10 minutes)
5 40" Nitto trail grapplers
5 ATX slab beadlocks
Spline lock lug nuts
Super chip programmer
Poison spyder hood vent
Tom woods 1350 drive shafts front and rear
I am sure I am forgetting some things. The wheels will be cleaned up and touched up before receiving vehicle. I have always cleaned the underneath and repainted any scratches from wheeling. I run amsoil throughout the vehicle and always stay on top of maintenance. This one of the cleanest jeeps you will find that actually gets wheeled. My goal on this jeep was to build a rig that will run 80 down the highway and be able to wheel hard and feel comfortable that we won't break anything. So far it has done great. Asking 34,500.00 or I would be interested in a trade on a 4 door. If you have any questions feel free to e-mail me.
Standard equipment
Manual Cruise control
A/C
Everything works as it should
Front axle
1979 ford dana 60 completely rebuilt
ARB locker with 5:38 gears
Custom built brackets out of 1/4" steel
Custom built steering with 7/8 ruff stuff heim joints
1.5" sold aluminum tie rod
1.5" PSC steering ram
Chromoly 35 spline outers
Yukon locking hubs
Ruff stuff 3/8" thick diff cover
Rear axle
1988 & older 14 bolt axle completely rebuilt
ARB locker with 5:38 gears
Disc brake conversion
Custom brackets and truss
Undercover fab diff cover
Pinion guard
Suspension
RRK 2-5/8 12" travel coilovers up front
Fox 2.0 14" travel coilovers in the rear
Rock krawler arms front and rear
The rear is stretched 8"
Armor and bumpers
Custom built rear corner armor
Custom built rocker skins
Poison spyder BFH front bumper
Gen right aluminum tire carrier
Interior
Rock Hard roll cage
Spod switch panel
Master Craft Baja RS seats up front and matching rear seat cover
Crow racing harnesses with detachable harness bar for shoulder harnesses
Pioneer CD player
Polk audio speakers
Misc.
Superwinch 9k winch
10" rigid light bar
Rigid dually back up light
Viair dual compressor under hood. (Air up all 4 tires in 10 minutes)
5 40" Nitto trail grapplers
5 ATX slab beadlocks
Spline lock lug nuts
Super chip programmer
Poison spyder hood vent
Tom woods 1350 drive shafts front and rear
I am sure I am forgetting some things. The wheels will be cleaned up and touched up before receiving vehicle. I have always cleaned the underneath and repainted any scratches from wheeling. I run amsoil throughout the vehicle and always stay on top of maintenance. This one of the cleanest jeeps you will find that actually gets wheeled. My goal on this jeep was to build a rig that will run 80 down the highway and be able to wheel hard and feel comfortable that we won't break anything. So far it has done great. Asking 34,500.00 or I would be interested in a trade on a 4 door. If you have any questions feel free to e-mail me.
