HawaiiMark

I want to install a back up camera in 2016 Rubicon with the 430N nav unit. Is there a programmer that will allow me to enable the back up camera function on the nav or should I just pay the dealer to do it? If the programmer is couple of hundred and the dealer is going to charge $100 or so, then I would prefer to spend the money on a programmer.

ShutterBug

You either have to use a Lockpick or a Navtool device or have the dealer flash the computer. I know of no programmer that will enable this feature.

jedg

Yup. Lockpick is pretty easy and gives you other options as well.

HawaiiMark

Ok, I decided to do the LockPick and also liked their back up camera so I ordered the full package. Thanks for the advise.

navtool.com

hi , we have the best product in the industry 100% made in USA, 100% automotive grade

navtool.com

Hi

Special Pricing For JK forum members

All NavTool Product are 100% automotive grade and Made In USA

All interface are compatible with all JK Radios 430/RBZ, 430N/RHB, 730N/RHR, 730N/RER, REN

Compatible with Jeep JK 2007-2015

We Are 100% compatible with manual transmission JK.

100% Plug & Play Options:

No Dealer Programming Required.

Option 1 features:

• Video In Motion.
• Navigation In Motion
• Control In Motion
• 4 Camera Inputs: Front Camera, Left/Right Side Camera, Rear Camera.
• Force any camera in drive.
• Side Cameras if installed are used as lane watch, left and right camera inputs can be activated with turn signals.(no extra wiring required)
• HDMI limitless smartphone (iOS, Android, Windows Phone, Blackberry) mirroring (Netflix, YouTube, iOS) all works with no limitations.
• Non Navigation radios use smartphone for navigation.
• Navigation radios use favorite navigation app including Waze on your screen.
• 1 Audio Video Output for rear screens.
• 100% plug and play

Price: $399

Option 2 features:

• Video In Motion.
• Navigation In Motion
• Control In Motion
• 4 Camera Inputs: Front Camera, Left/Right Side Camera, Rear Camera.
• Force any camera in drive.
• Side Cameras if installed are used as lane watch, left and right camera inputs can be activated with turn signals.(no extra wiring required)
• 1 Audio Video Input
• 1 Audio Video Output for rear screens.
• 100% plug and play

Price: $250

Option 3 features:

• Video In Motion.
• Navigation In Motion
• Control In Motion
• 1 Rear View Camera Input.
• Force rear camera in drive.
• 1 Audio Video Input
• 1 Audio Video Output for rear screens.
• 100% plug and play

Price: $200

Option 4 features:

• Video In Motion.
• Navigation In Motion
• Control In Motion
• 1 Rear View Camera Input.
• Force rear camera in drive.
• 100% plug and play

Price: $175

Option 5 features:

• Video In Motion.
• Navigation In Motion
• Control In Motion
• 100% plug and play

Price: $150

ALL ABOVE IS 100% PLUG AND PLAY

Option 6 features: NON PLUG AND PLAY, REQUIRES TO SPLICE 4 WIRES

• Video In Motion.
• Navigation In Motion
• Control In Motion
• 1 Rear View Camera Input.
• Force rear camera in drive.

Price: $125 NON PLUG AND PLAY, REQUIRES TO SPLICE 4 WIRES

Contact US to Order via PM or e-Mail.

Post all questions below.

ShutterBug

I'm interested in the Navtool product. But I have a question.

My 730/RHR is not out of a Wrangler. I bought it third hand. My guess is that it is out of a Charger SRT. Would this product be compatible with it?

navtool.com

yes , but if you don't have steering wheel buttons no video in motion

ShutterBug

My previous radio was a 130 and I have UConnect with the steering wheel controls.

navtool.com

hi, you should be good to go