rear view camera
#3
JK Newbie
Join Date: Nov 2012
Location: Bourbonnais, IL
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
My Install-
I purchased the PAC connector- Gino camera-connected to reverse light wire and went to dealorship to have my 430N HU flased. Mounted camera and Done. I have detailed instructions and where I purchased everything.
#6
JK Newbie
Join Date: Nov 2012
Location: Bourbonnais, IL
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
No parking break. Wired to reverse light on drivers side.
#7
JK Freak
Join Date: Apr 2011
Location: Lakeland, Florida
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
Did a thread about my experience a while back...
https://www.jk-forum.com/forums/jk-e...der-jk-274533/
If you have the MyGig it's best to lockpick it. My 2010 didn't have any video screen to use so I went the mirror route. Still works great.
https://www.jk-forum.com/forums/jk-e...der-jk-274533/
If you have the MyGig it's best to lockpick it. My 2010 didn't have any video screen to use so I went the mirror route. Still works great.
Trending Topics
#8
JK Enthusiast
I would like to see your write up!
I do not have the camera mounted but I have it hooked to the camera rca connector on the harness. Is there something I am missing?