ScanGauge II Installed - Pics
#1
JK Freak
Thread Starter
ScanGauge II Installed - Pics
Got it this morning and she installed nice and cleanly above the CB! The lead was inch perfect to allow it to thread behind the panelling and down to the OBDII. Literally an inch shorter and it would not have worked.. Anyways, she fired up first time and altho I've not calibrated yet, seems to be working fine:
This is in a 2.8 CRD and all seems to be working fine so far.
This is in a 2.8 CRD and all seems to be working fine so far.
#4
JK Freak
Thread Starter
Cheers guys! Does work well and when I've finished cleaning up that bit of velcros sticking out it looks pretty stock with the cables disappearing nicely behind it.
#6
JK Freak
Thread Starter
Tell ya what, this thing paid for itself today. Darn engine keeps throwing me a P0087 code which causes her to go into limp mode. Being able to read the code instantly and clear on the move was very handy indeed.
#7
JK Freak
Join Date: Jan 2011
Location: Alexandria, VA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
P0087 possible causes:
- Faulty fuel pump
- Blocked fuel filter
- Faulty fuel pressure solenoid
- Faulty Fuel injector
Trending Topics
#8
JK Freak
Thread Starter
Yup, thanks for this. Mine is a 2.8 CRD so there are a few more things that can be added to that list, too.
#9
JK Freak
Join Date: Jan 2011
Location: Alexandria, VA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
This is where I mounted mine, using 3M velcro from an EZ-Pass transponder (used for our toll road system). I lock it in the Tuffy drawer when it needs to be secured.