Slow and Steady build - 2015 RUBICON ANVIL
#1
JK Super Freak
Thread Starter
Join Date: Nov 2007
Location: Massachusett
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Slow and Steady build - 2015 RUBICON ANVIL
Ok the victim is a 2015 Anvil 2015 Rubicon. I built up a 2007 4 door and I'm at it again.
So far I have installed evap kit relo, Or-fab Mid width bumper, Superwinch talon 9500 and today I've added 315/75/16 (34.6") tires with Rebel Racing matte black rims. Also installed locking tuffy trunk.
Next is a lift but my goal is LCG this time around so I have to study my options.
If anyone is doubting a 2 door rubicon definitely fits 34.5" tires as long as you take off the rock rails. Not yet sure if I'd wheel it this way but I'll assess in a few days as I live on a 1 mile long fire road that is very beat up.
So far I have installed evap kit relo, Or-fab Mid width bumper, Superwinch talon 9500 and today I've added 315/75/16 (34.6") tires with Rebel Racing matte black rims. Also installed locking tuffy trunk.
Next is a lift but my goal is LCG this time around so I have to study my options.
If anyone is doubting a 2 door rubicon definitely fits 34.5" tires as long as you take off the rock rails. Not yet sure if I'd wheel it this way but I'll assess in a few days as I live on a 1 mile long fire road that is very beat up.
#3
JK Super Freak
Thread Starter
Join Date: Nov 2007
Location: Massachusett
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Debating on a 3.5" lift vs 2.5". I'm just trying to determine on a 2 door what I'd have to change. with a 2015 the pinch seems look to be far enough away so that they won't be a issue. If I do a lift I would likely get one with control arms so that I can move the axle back or the tires would definitely get to close to the seam. There is about 1 3/4 " clearance without a lift.