04GreenZ's Mongo JK Build
#1
JK Enthusiast
Thread Starter
Join Date: Feb 2013
Location: Marietta, GA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
04GreenZ's Mongo JK Build
Sold my baby today, and on the road to finally getting my JKU. Already have a stockpile of parts and I'm sure the list will grow and grow.
Out with the old:
New on its way..
Parts list:
Smittybilt XRC Mod bumper
Rough Country light mounts (windshield upper/lower)
50" Led combo bar
(2) 16 watt Rigid Dually clones
Rugged Ridge Cowl Armor
Rancho 4" Sport Kit
Bilstein 5100 front and rear
Bestop Bikini Top
On order:
The Source S-POD
Bushwacker Flat Fenders
SRC Step sliders
Spyder rear bumper with tire carrier
Yukon 5.13 gears with install kit
SpyderTrax 1.5 spacer
TruckLite headlights
Out with the old:
New on its way..
Parts list:
Smittybilt XRC Mod bumper
Rough Country light mounts (windshield upper/lower)
50" Led combo bar
(2) 16 watt Rigid Dually clones
Rugged Ridge Cowl Armor
Rancho 4" Sport Kit
Bilstein 5100 front and rear
Bestop Bikini Top
On order:
The Source S-POD
Bushwacker Flat Fenders
SRC Step sliders
Spyder rear bumper with tire carrier
Yukon 5.13 gears with install kit
SpyderTrax 1.5 spacer
TruckLite headlights
Last edited by 08GumbyJKU; 05-10-2014 at 11:36 AM.
#3
JK Freak
Sold my baby today, and on the road to finally getting my JKU. Already have a stockpile of parts and I'm sure the list will grow and grow. Out with the old: New on its way.. Parts list: Smittybilt XRC Mod bumper Rough Country light mounts (windshield upper/lower) 50" Led combo bar (2) 16 watt Rigid Dually clones Rugged Ridge Cowl Armor Rancho 4" Sport Kit Bilstein 5100 front and rear Bestop Bikini Top On order: The Source S-POD Bushwacker Flat Fenders SRC Step sliders Spyder rear bumper with tire carrier Yukon 5.13 gears with install kit SpyderTrax 1.5 spacer TruckLite headlights
#7
JK Enthusiast
Thread Starter
Join Date: Feb 2013
Location: Marietta, GA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Ask and you shall receive.
Day I bought Gumby
It's home and stock (at least i drove it back without the freedom tops on right!)
In for the 4" Rancho Sport kit with Bilstein 5100's. As you can see it's already got the XRC M.O.D. bumper on with LED pods and windshield mounts for pods and a bar)
Goodies
Front first. (of course)
After throwing some wrenches, realizing my buddy didn't bolt the driver side control arm drop bracket on right and not being able to figure out why we couldn't get the axle to line up right...we (twin brother and myself) fixed it.
...He's a dumbass...
Back on the ground
Carolina squat..
Finished him up pretty late on day 2
Ater some ESP issues, pan hand bar adjustment and figuring out what was banging on the drop from the garage floor he's good to go. (still gotta figure out why the driver lower control arm makes a banging noise on sudden drops/bumps.
And had to take the doors off. The white is my brothers girlfriend's '14 Oscar Mike JKU with a long list of mods to come as well. I just don't like to drag my feet
Truck-Lites, a Little Black Box came today, rear bumper comes thursday as well as my light bar(replacement for the 52" that came that ended up not fitting) will keep updating as i guess this will be my build thread.
Day I bought Gumby
It's home and stock (at least i drove it back without the freedom tops on right!)
In for the 4" Rancho Sport kit with Bilstein 5100's. As you can see it's already got the XRC M.O.D. bumper on with LED pods and windshield mounts for pods and a bar)
Goodies
Front first. (of course)
After throwing some wrenches, realizing my buddy didn't bolt the driver side control arm drop bracket on right and not being able to figure out why we couldn't get the axle to line up right...we (twin brother and myself) fixed it.
...He's a dumbass...
Back on the ground
Carolina squat..
Finished him up pretty late on day 2
Ater some ESP issues, pan hand bar adjustment and figuring out what was banging on the drop from the garage floor he's good to go. (still gotta figure out why the driver lower control arm makes a banging noise on sudden drops/bumps.
And had to take the doors off. The white is my brothers girlfriend's '14 Oscar Mike JKU with a long list of mods to come as well. I just don't like to drag my feet
Truck-Lites, a Little Black Box came today, rear bumper comes thursday as well as my light bar(replacement for the 52" that came that ended up not fitting) will keep updating as i guess this will be my build thread.
Trending Topics
#9
JK Enthusiast
Thread Starter
Join Date: Feb 2013
Location: Marietta, GA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Been a little while but making some progress. Finally got all my lights in, the "Black Box", Sliders, some Georgia Mountain Paracord grab handles, and 37s go on tomorrow. Rear bumper came without tire carrier hardware and has turned into a nightmare, so I may just get rid of it and get a non-carrier bumper. Just got done with the pinch seams and seem to be in good shape. Cut the fenders a few days ago too. Not too excited about the results and may order a set of the XRC flat fenders, but well see. Ill upload pics later.
#10
JK Enthusiast
Thread Starter
Join Date: Feb 2013
Location: Marietta, GA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
And to the pics.
Finished up the lights(Truck Lites, 50" Light bar, 4 duallys)(rock lights on the way)
Wired up the black box and added switches
Cut the fenders and pinch seam
Installed the Georgia Mountain grab handles
Dropped Gumby off for 37s
And now he's sitting high and meaty(17x9 Pro Comp 7033, 37x12.50x17 MasterCraft MXT)
Added a JKS front adjustable track bar--after some big help from forum members got some issues figured out
And of course before and after pic
Finished up the lights(Truck Lites, 50" Light bar, 4 duallys)(rock lights on the way)
Wired up the black box and added switches
Cut the fenders and pinch seam
Installed the Georgia Mountain grab handles
Dropped Gumby off for 37s
And now he's sitting high and meaty(17x9 Pro Comp 7033, 37x12.50x17 MasterCraft MXT)
Added a JKS front adjustable track bar--after some big help from forum members got some issues figured out
And of course before and after pic