They are awesome looking and I've been happy with mine. I just suggest you get a socket that will fit the socket wells. If you use the stock lugs its a 19mm thin wall socket.
Here's mine after installation.
2007 Unlimited Sahara Rescue Green
Teraflex 2.5 BB
BFG MT's 285/70/17
Nifty Grab handles all around
MORE front bumper
did your lug holes also look like they werent completely coated? Mine were immediatly noticeable once I opened the box. For 200 bux per wheel I would expect a little better quality control than that. Especially from AEV.
FOR SALE: Light Greystone Unlimited Rubicon, 6spd, Rancho 4" Long Arm Supension, 4.88's, Ramsey AEV Bumper, Ramsey Rockcrawler Winch, PIAA 520, 9" HID driving lights, AEV Pintlers Argent, Yakima Spare Joe, Clear Bra (email email@example.com)
mine were noticable... not anything that i was all that worried about. once you put the lugnuts in you cant see there anyway.
since they are powdercated there probably isnt much you can do about it... the wheel is electrically charged and they mist the powder in front... any particles would stick to the surface of the wheel/front of the hole before making it to the back of the hole. they are aluminum so any "missed" areas should be fine...
2007 Black Wrangler Unlimited Sahara. Dual Top, Full doors, Power Group, Sirius 6 Disc
[x] 2.5" Teraflex BB
[x] 315x70R17 Mickey Thompson Baja MTZ
[x] AEV Pintler Rims - Silver
[ ] Shrockworks Front Bumper Stubby
[ ] Strockworks Sliders
[ ] Shrockworks Rear Bumber or Expedition One Trail Series Rear Bumper