What was done to your JK this week?
03-05-2015, 06:47 AM
JK Newbie
Join Date: Apr 2014
Location: jersey
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Added a TeraFlex leveling kit yesterday. While certainly within my skill level to manage, the provided instructions were quite limited and did not take everything into account. Especially in the rear, when lowering the axle, one should loosen the e-brake cables and wheel speed wiring to obtain the clearance needed to remove the springs. My springs also required some compression and strong negotiation to re-install them with the spacers in place. The front was more straight forward. Overall, the process took 3 hours from before pics to after pics and clean up. Before leveling kit <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=599362"/> After leveling kit <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=599363"/>
03-05-2015, 01:45 PM
JK Newbie
Join Date: Apr 2013
Location: Valdosta, Georgia
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
The Avenger
My baby is growing up so fast! Finally got some 37in Toyo's on a 3.5in Rubicon Express lift with 2.0 Fox Shocks, and 1.75in spydertrac spacers and teraflex exhaust spacer. I'm 6' tall, so its kinda nice to finally have a vehicle that is taller then me! Here are some before and afters! Finally, after 2 years of hard work, gather enough cash up to do so now three more years of college left then I can finally finish this beast!
03-05-2015, 03:59 PM
JK Freak
Join Date: Jun 2012
Location: Tallahassee, FL
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Finally replaced my drag link end with a MOOG greasable one, and swapped out my drop pitman arm for the OEM one. I can happily say that I no longer have any more rough country on my Jeep.
03-06-2015, 07:01 AM
JK Enthusiast
Picked up my new 40's. Put them beside my loaner bald 35's for comparison. Measured out at 39.7in at the tallest point and weigh at 103lbs on the scale I have