Rizzo22

2 door jk with a 3.5" Rubicon Express standard lift and 35" pro comp extreme A/T. Or a similar set! Thanks!

NUKEM-10

This is a 3.25" lift with 35" mud grapplers


And this is a 2.5" lift with 35" mud grapplers and flat flares

Mark Doiron

Headed back there in October. Be my fourth trip. Excited to be going again.

NUKEM-10

I love it over there. I cant even count how many times i have been there. Ive been wanna to go back, but lately its been to hot.

Rizzo22

Do you have any problems with it? Or anything you have to correct? I have the 3.6L with 3:73 gears, a Dana 44 in the rear and a 35 in the front.

Rizzo22

Did you need new drive shafts?

NUKEM-10

As far as the ride height goes, no i havent had any problems. For about a year i had the stock 3.73 gears it was ok, but a also have the 3.8L. When i got a programmer it livened up some, but when i regeared to 5.13s it made the biggest difference i thought. And to answer your question about the driveshaft, no i have not changed them out and i havent had any trouble from them sense i put the lift on, and that was about 30k miles ago. The only thing that has happened is the front driveshaft boot tore on me, but that normal if you wheel your rig. and it happened at almost this momment.