Replaced my ESIM(Evaporative System Integrity Module)
03-02-2013, 10:47 AM
#1
JK Junkie
Thread Starter
Join Date: Apr 2011
Location: Morris County, NJ
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
Replaced my ESIM(Evaporative System Integrity Module)
So, I've been hearing some clanking when I take sharp turns around 5-15mph. I'm very hands-on with my jeep, check things frequently, ranging from tire pressure, re-torquing, fluids, etc. That being said, I was pretty sure it wasn't anything lose such a rear track bar, rear sway bar, and so on.
So, I guess that being my jeep sits pretty high, I was walking by and saw something hanging. I'm like WTF? Get down under the jeep(of course, it starts to snow the minute I crawl under!), and it's the ESIM. Cracked where the hose attaches. Needless to say, picked up the new Evaporative System Integrity Module, popped off the old one, slide the hose on the plastic cone and good to go.
That's all, thought I'd share incase anyone has any questions about it.
So, I guess that being my jeep sits pretty high, I was walking by and saw something hanging. I'm like WTF? Get down under the jeep(of course, it starts to snow the minute I crawl under!), and it's the ESIM. Cracked where the hose attaches. Needless to say, picked up the new Evaporative System Integrity Module, popped off the old one, slide the hose on the plastic cone and good to go.
That's all, thought I'd share incase anyone has any questions about it.
09-11-2013, 05:02 PM
#4
JK Newbie
Join Date: May 2013
Location: new mexico
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
