Notices
JK Wheels and Tires For all questions and answers concerning Wheels and Tires for Jeep JKs.
Sponsored by:
Sponsored by:

Upgrading Wheels and Tires, Stock Suspension

Thread Tools
 
Old 09-29-2016, 12:07 PM
  #1  
JK Newbie
Thread Starter
 
CollinJK's Avatar
 
Join Date: Jul 2011
Location: wesson, ms
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Upgrading Wheels and Tires, Stock Suspension

Gents,

1st post, i have been a lurker for a few years. I have a 2010 Black JK 2dr Sport completely stock. I am currently wanting to upgrade wheels and tires. Looking at 33x12.5x15 Grabber AT2 with 15x8 MB TKO with 3.75 backspacing. Wanted to see if this setup will work with no lift and recommendations and concerns appreciated. Thanks
Old 09-29-2016, 04:31 PM
  #2  
JK Super Freak
 
shabbernigdo's Avatar
 
Join Date: Nov 2012
Location: missouri
Posts: 1,103
Likes: 0
Received 3 Likes on 3 Posts
Default

look at the stickey. it has the nessary Information.
Old 09-30-2016, 06:37 AM
  #3  
JK Newbie
 
alexwblackJK's Avatar
 
Join Date: Jun 2014
Location: Houston, TX
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default

the tires will fit.. not to sure about the wheels.. are those the Steels?.. you may need a spacer... Why not use a 17" wheel?? just curious...
You can run up to a 35 with no lift...
there are a few guys in our local group that run the steely 15's with 35's no lift and wheel the hell out of their rigs...
Old 09-30-2016, 07:11 AM
  #4  
JK Newbie
Thread Starter
 
CollinJK's Avatar
 
Join Date: Jul 2011
Location: wesson, ms
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Being honest i kind of just like the look of the 15". They are not steels the steels can rub the calipers. I currently have the stock 17" wheels if i just go with the stock wheels i will have to use spacers correct??
Old 09-30-2016, 09:23 AM
  #5  
JK Newbie
 
Redsand's Avatar
 
Join Date: May 2016
Location: CT
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by CollinJK
Being honest i kind of just like the look of the 15". They are not steels the steels can rub the calipers. I currently have the stock 17" wheels if i just go with the stock wheels i will have to use spacers correct??
Yes you would need spacers. I have 16" steelies and I love them they are easier than the 15" because most fit and didnt love the 17" either. Mine are procomp and were about 85$ each give them a look.
Old 09-30-2016, 10:07 AM
  #6  
JK Jedi Master
FJOTM Winner
 
nthinuf's Avatar
 
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,465
Likes: 0
Received 162 Likes on 154 Posts
Default

Discount Tire recommends those rims for fitment on JK's, you should be fine with the backspace and caliper clearance. But, stuff the tires and check the clearance with the flares, since the tires will no longer tuck up inside the wheel wells. You may need to do some trimming or add bumpstop.

A good 15" thread, if you haven't browsed it yet.

https://www.jk-forum.com/forums/spon...wheels-120933/



Quick Reply: Upgrading Wheels and Tires, Stock Suspension



All times are GMT -8. The time now is 12:38 AM.