gpwpat

With much regret, well actually my family outgrew our tent. This was lightly used and for the past 7 years not at all. This is an EEZI Awn 1800 Roof Top Tent. this is the Top of the line roof top tent. It can be bolted to any roof rack, or in my case a steel lid, and all parts I made to convert a Bantam into a camping trailer. all parts were made to clamp on to the trailer and therefor unharming originality. If bolts were used in the case of the receiver for hauling a spare and the stabilizer leg it uses existing holes. Eezi-Awn Series 3 1800 Roof Top Tent Origional price $2700 I am asking $1800 with all parts to convert the trailer if you want them for free. I also have a newer cover for it. the original turned crispy in the sun and I use that for storage. the Newer one I keep in the box except when used which is never. Located in Sacramento Ca. area. call or text IM 916-218-5473
This really is a great tent. The trailer is not for sale. I need to keep it with my jeep.

cencaljk

Crawler Cocepts front flat fenders. These are also bed lined, only reason for selling is because i am looking into getting their narrow fenders instead. Will include the side marker lights $450
Attachment 645062

BKGM Jeepers

Located near Sacramento

I'm selling my welder

Hobart Ironman 210
With large wire spool
With large tank
Welding hood too

1000/offer

srbell0585

Sent pm

mmccurdy

Hi All,

I recently upgraded to a ProRock 44 so I have my original D30 front axle for sale. Most of the value is in the internals, but at this point the housing and C's are pretty beefed up.

The good bits:

• Includes an ARB air locker (RD100). I'll include a brand new locker wiring kit w/ air hose and solenoid (came with my new axle and I just reused the ones I had).
• 5.13 gears.
• Includes one set of inner shafts and one set of complete shafts w/ u-joints and stubs.
• C's and lower control arm mounts are gusseted with EVO weld-on gussets.
• Rock Krawler truss.
• Sweet steering stabilizer relocation bracket.
• ARB diff cover.

The not good bits:

• One or both inner seals leak (slowly). I have a vague recollection that the shafts that were in there may have some scoring on the seal seat causing them to leak eventually. The complete shafts that I'm including don't have that issue, but it probably needs new seals if you're going to reuse the housing.
• The gussets were done by a... "non-professional" welder (me), so they're not flawless, but they're decent (if I do say so myself).
• Lower ball joints have some play in them. Probably going to want new ball joints all around.

$500 seems pretty fair to me (the locker alone is over $900 new and it's in fine condition, but I'd really like to sell everything together to someone local vs. parting out).

(sorry for the horrendous pics)

SF_E60

Wish you were closer! Do you have any more close up pictures of the Wild boar grill? Willing to ship?

BKGM Jeepers

I have several small things for sale.

backpack fly fishing kit - $50
backpack fly/spinning combo kit - $50

Both come with their soft carry case.

LED rock light kit, includes WIFI controller allowing you to change light colors and patterns. Complete kit. Brand new, in box.
I paid nearly $250 for this. $120.


Mountain Bike - Giant VT-3 medium frame. Excellent to like new condition.
Paid $1800.
Selling for $500.
Just PM me for pics, or details on anything above.

Brad
M - 916-802-4950
Everything is located near Sacramento, in NorCal.

SF_E60

Pm'd you

algolfer

I have a set of stock sliders off my 2015 4 door Rubicon. Like new. Asking $100 or best offer.

cencaljk

Have a set of C Gussets for a Dana 44 axle $55

also Rigid industries A pillar brackets $25