Size of fender flare rivets?
 

Need to know the size of the plastic rivets for the stock flares, and a part number please. Thanks

https://www.jk-forum.com/forums/show...d-clips-needed

https://www.jk-forum.com/forums/show...e-fender-clips

https://www.jk-forum.com/forums/show...-Fender-Flares!

How many do you need? I might have extra from my flare swap out.

thanks but im looking for the plastic rivets that hold the inner fender flare to the flare, not the arrow head clips. I found mopars part # 6506007AA, but i am looking for the actual size of the mopar rivets so i can buy them somewhere else for cheaper then $1.49 a rivet, im changing all four flares. thanks.

I looked other places for those stupid rivits with no success. I ended up using this type of drywall anchor instead. Metal is tougher than plastic and you don't have to drill them to get them out!! They'll be around $5 for 50 of them :thumbsup: Since they are under the fender lip you won't see that they have a silver head instead of a black head (you could always paint them too)

http://www.johsoncn.com/products/anc...all_anchor.jpg