Popping out of 4wd low
#1
JK Newbie
Thread Starter
Join Date: Aug 2011
Location: Petaluma, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Popping out of 4wd low
Last weekend I was on a run between Reno and Virginia City and the transfer case kept popping out of 4wd low? 1" body lift. Do I need the teraflex transfer case linkage bracket? This bracket takes the linkage off the body, keeping it from being tweaked from the body lift?
#3
JK Newbie
Thread Starter
Join Date: Aug 2011
Location: Petaluma, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Putting in the Terra-flex shifter bracket to take the linkage off the body side. The 1" lift tweaks the angle of the shifter linkage. Terra-flex shifter mounts just to the transfer case. Going o Hollister next weekend to test it out...
#5
JK Enthusiast
Join Date: Apr 2011
Location: Hoboken, NJ
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Im not positive but I think that shifter bracket is for TJ's. I could be wrong though.
#6
JK Enthusiast
Join Date: Jul 2008
Location: El Republica De Norte Cuba, USCF
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
JK Super Freak
I was riding in a Jeep recently that popped out of 4-lo twice. After the driver pulled it back into 4-lo for the third time I reached over and yanked the lever the rest of the way into 4-lo. He had not been shifting it fully into 4-lo. It did not pop out again.
#9
JK Enthusiast
Join Date: Jan 2012
Location: Bellevue, TX
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
This weekend while running a trail with the 2011 JKU Rubicon, the transfer case kept kicking out of 4-low, just before it came out the first time the hot oil light came on, trans cooler already ordered... I had been in 4-low for awhile during the climb.... I feel it was in 4-low all the way..... Any ideas on what else could be going on?