Notices
JK Write-Ups Bulletin board forum regarding useful installation write-ups, budget fixes and homemade solutions for the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X).

Drilled the side view mirrors!

Thread Tools
 
Old 01-03-2007, 06:16 PM
  #21  
JK Jedi
Thread Starter
 
Rubimon's Avatar
 
Join Date: Sep 2006
Location: So. Cal.
Posts: 5,567
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Heyspike
Just a thought, but I do this with my Harley
I use a backpack blower and blow all the water off the bike. It works great! The air gets in all the nooks and crannies
The neighbors think I'm nuts, but who cares
I do the same with my compressor. All the air in the world won't get all the water out of those mirrors!
Attached Thumbnails Click image for larger version

Name:	image (7).jpg
Views:	61
Size:	99.4 KB
ID:	432357   Click image for larger version

Name:	image (6).jpg
Views:	52
Size:	92.7 KB
ID:	432358   Click image for larger version

Name:	image (1).jpg
Views:	56
Size:	57.9 KB
ID:	432359   Click image for larger version

Name:	image-4007123615.jpg
Views:	37
Size:	84.8 KB
ID:	432360   Click image for larger version

Name:	image (9).jpg
Views:	53
Size:	68.3 KB
ID:	432363  

Click image for larger version

Name:	image (11).jpg
Views:	46
Size:	62.1 KB
ID:	432365   Click image for larger version

Name:	image (16).jpg
Views:	42
Size:	53.5 KB
ID:	432366   Click image for larger version

Name:	image (13).jpg
Views:	44
Size:	50.9 KB
ID:	432371   Click image for larger version

Name:	photo (1).jpg
Views:	41
Size:	89.4 KB
ID:	468699   Click image for larger version

Name:	image (4).jpg
Views:	40
Size:	97.1 KB
ID:	468700  

Click image for larger version

Name:	image (3).jpg
Views:	38
Size:	41.1 KB
ID:	468701   Click image for larger version

Name:	image (2).jpg
Views:	50
Size:	89.0 KB
ID:	468702  
Old 01-04-2007, 04:57 PM
  #22  
JK Newbie
 
BAArcher's Avatar
 
Join Date: Dec 2006
Location: Alabama
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

I would also bet that if you had the holes drilled in your mirrors, it would suck all of the water out when you got enough air flowing over the surface.
Old 01-19-2007, 03:08 PM
  #23  
JK Jedi
Thread Starter
 
Rubimon's Avatar
 
Join Date: Sep 2006
Location: So. Cal.
Posts: 5,567
Likes: 0
Received 1 Like on 1 Post
Default

By the way, I was washing my Jeep the other day. I hit my mirror with the hose and then counted to see how many seconds it took to drain. It had a steady stream for over 30 seconds. It holds more than I thought.
Old 01-20-2007, 08:00 AM
  #24  
JK Freak
 
biglynny's Avatar
 
Join Date: Oct 2006
Location: seattle
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default A mod?

Once I got the drill and bit assembled it might have taken all of 15 seconds a side to line it up and drill the holes. Is this a mod?
Old 01-20-2007, 08:22 AM
  #25  
JK Jedi Master
 
Robar's Avatar
 
Join Date: Nov 2006
Location: .
Posts: 15,170
Likes: 0
Received 0 Likes on 0 Posts
Default

It's high speed and low drag, but it is a mod.
Old 01-20-2007, 08:50 AM
  #26  
JK Jedi
Thread Starter
 
Rubimon's Avatar
 
Join Date: Sep 2006
Location: So. Cal.
Posts: 5,567
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by biglynny
Once I got the drill and bit assembled it might have taken all of 15 seconds a side to line it up and drill the holes. Is this a mod?
How could you ask such a question, it's the best bang for the buck mod on the board. Just look at the number of reviews and replies. 2nd place. Wait until everyone that didn't do it starts wondering why their doors are rusting out at the bottom.
Old 01-20-2007, 12:34 PM
  #27  
JK Enthusiast
 
jpaddict's Avatar
 
Join Date: Sep 2006
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Default

Great mod! About 15 seconds per side. A rather large quantity of water flows out. Do it while the JK is new so you don't have rusty doors later.
Old 01-22-2007, 10:50 AM
  #28  
JK Enthusiast
 
Jeephrog's Avatar
 
Join Date: Dec 2006
Location: Murrieta, CA
Posts: 357
Likes: 0
Received 0 Likes on 0 Posts
Default

Did mine the other day and it drained like a mutha'.

I have also noticed that water seems to drip from where the torx bolt goes in. I wonder if that just needs a tightening.
Old 01-22-2007, 11:48 AM
  #29  
JK Jedi
 
doojer's Avatar
 
Join Date: Nov 2006
Location: SoCal, USA
Posts: 5,831
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Rubimon
Wait until everyone that didn't do it starts wondering why their doors are rusting out at the bottom.
Is this really possible? I honestly never cared about the drips because my JK is never clean for more than 10 minutes anyways and I rarely use soap.... Do you really think that the water dripping out will rust the doors? And isn't this something that DC would have to fix if it happened?

Don't get me wrong, it's a great mod-- I just thought eliminating the drip was more of a beauty thing than an actual protective thing....
Old 01-22-2007, 01:58 PM
  #30  
JK Jedi
Thread Starter
 
Rubimon's Avatar
 
Join Date: Sep 2006
Location: So. Cal.
Posts: 5,567
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by doojer
Is this really possible? I honestly never cared about the drips because my JK is never clean for more than 10 minutes anyways and I rarely use soap.... Do you really think that the water dripping out will rust the doors? And isn't this something that DC would have to fix if it happened?

Don't get me wrong, it's a great mod-- I just thought eliminating the drip was more of a beauty thing than an actual protective thing....
When I saw how much water the mirror holds and took one of my mirrors off, I can't imagine that some of that water doesn't drip through the two mounting holes in the doors also. Can't say for sure that it causes water to sit in the door, but now I dont have to worry about it. Take one mirror off and you be the judge. Do it after you wash and dry it, or maybe after a long rain.


Quick Reply: Drilled the side view mirrors!



All times are GMT -8. The time now is 12:31 AM.