Installed Kilby EVA Relocation Kit, now getting P0456 Engine Check Code
#1
JK Enthusiast
Thread Starter
Join Date: Aug 2009
Location: Naples,Florida
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Installed Kilby EVA Relocation Kit, now getting P0456 Engine Check Code
about 40 days ago, I installed Kilby EVA relocation kit. My JK was running as usual.
But today, I got a engine check light on and the DTC cod reads
P0456 - EVAP PURGE SYSTEM SMALL LEAK
So, besides re tightening all the hoses, what else should I do to solve this issue?
But today, I got a engine check light on and the DTC cod reads
P0456 - EVAP PURGE SYSTEM SMALL LEAK
So, besides re tightening all the hoses, what else should I do to solve this issue?
#2
JK Enthusiast
Join Date: Jun 2010
Location: North VA
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
When you removed the large rectangular piece on the back, did you see a small rubber gasket? It is easy too loose / misplace. If it is not in there it will throw that code.
#3
JK Freak
Join Date: Aug 2008
Location: Clearfield, Utah
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
This is why I just went with a good skid plate. I did notice however, when I did mine that the washer mentioned tended to drop off the plastic connector and you had to make an effort to ensure it was in place prior to twisting the connector back on.
#5
JK Enthusiast
Originally Posted by SoupSandwich
When you removed the large rectangular piece on the back, did you see a small rubber gasket? It is easy too loose / misplace. If it is not in there it will throw that code.
RT
#6
JK Enthusiast
Join Date: Nov 2009
Location: Vancouver BC
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts