ORW JK Automatic Transmission Cooler Kit
#11
Sponsoring Vendor
ORW Representative
ORW Representative
Thread Starter
Join Date: Aug 2010
Location: San Diego, Mexico, Australia
Posts: 1,759
Likes: 0
Received 3 Likes
on
3 Posts
The 2012 models have a much larger, better set up factory cooler than the earlier models. We are working on a cooler kit that will be a direct bolt on for those wanting to upgrade their '12's. I believe it is still in the works. I will check to where we're at with that and let you know.
Justin
Justin
#13
Sponsoring Vendor
ORW Representative
ORW Representative
Thread Starter
Join Date: Aug 2010
Location: San Diego, Mexico, Australia
Posts: 1,759
Likes: 0
Received 3 Likes
on
3 Posts
I don't have any pics yet of the cooler mounted on a Ripp application, but we do have a kit designed for specifically that purpose now. I'll check with my other stores to see if they've done one installed yet, and if they took photos.
#14
JK Enthusiast
Join Date: Sep 2011
Location: Quitman, Texas
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
https://www.jk-forum.com/forums/show...mission+cooler
https://www.jk-forum.com/forums/show...ht=ripp+cooler
https://www.jk-forum.com/forums/show...ht=ripp+cooler
https://www.jk-forum.com/forums/show...ht=ripp+cooler
Last edited by 4wdave; 02-24-2012 at 05:52 PM.
#15
Sponsoring Vendor
ORW Representative
ORW Representative
Thread Starter
Join Date: Aug 2010
Location: San Diego, Mexico, Australia
Posts: 1,759
Likes: 0
Received 3 Likes
on
3 Posts
Just a little shout....
I just built up some more cooler kits, some regular "black hose", as well a few "stainless hose" kits. We're still offering the Special Deal!
Gonna start getting warm again soon out there, don't bake that tranny!
I just built up some more cooler kits, some regular "black hose", as well a few "stainless hose" kits. We're still offering the Special Deal!
Gonna start getting warm again soon out there, don't bake that tranny!
#16
Sponsoring Vendor
ORW Representative
ORW Representative
Thread Starter
Join Date: Aug 2010
Location: San Diego, Mexico, Australia
Posts: 1,759
Likes: 0
Received 3 Likes
on
3 Posts
I'm going to be putting more of these kits together tomorrow, it's warming up around here and demand is picking up again. I have both the true stainless braided hose, and the standard black-plenty of both. No one wants to be in limp mode crawling along trying to get off the trail(been there... ).
Same deal with free shipping!
Same deal with free shipping!
#18
JK Enthusiast
Join Date: Feb 2010
Location: Schofield Barracks, HI
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Ordered today. Thanks Justin. Got the bells and whistles yesterday doing slow 4wheel high driving. No limp mode. She did right and stopped to let it cool. Weird, I just told her about the fire/ overheat issue three days ago. Again thanks to all the forum members for the great info. I'll post pics of the before and after.
#19
JK Enthusiast
Join Date: Nov 2007
Location: Abu Dhabi, UAE
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
I'm not that technical but I drive hard and fast in desert , in the process of receiving my 2012 JKU after having an engine swap to the 392 HEMI 6.4 done to it. My question is will this help a lot after doing the engine swap and will it work ?????
#20
Sponsoring Vendor
ORW Representative
ORW Representative
Thread Starter
Join Date: Aug 2010
Location: San Diego, Mexico, Australia
Posts: 1,759
Likes: 0
Received 3 Likes
on
3 Posts
This particular kit doesn't work for the 2012's. I would expect with that swap(AWESOME, btw), and that kind of driving(me too), that you will need some form of auxiliary trans cooling. Although, I'm thinking that swap probably addresses that issue. I haven't seen one of those swaps in person, so I can't be 100% certain, but I'd be reasonably sure that it would come equipped well enough to stay cool.
If that's not the case, let me know-I'm sure we could build a kit that would work.
Justin
If that's not the case, let me know-I'm sure we could build a kit that would work.
Justin