Marker light mod
#592
Finally did it to my 2103 JKU. Used the single wire method and made a video. So easy.
http://youtu.be/qjbNPCcJ0Y0
http://youtu.be/qjbNPCcJ0Y0
#593
JK Newbie
Join Date: Jun 2016
Location: Lake Mary, FL
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
PIAA led driving lights
Anyone tried using the factory fog light wires to power the PIAA LED driving lights? I know they only draw like 5 amps each but don't want to be that guy that screws up his 2016 JKU by trying it..
#594
Super Moderator
You can't screw up your new truck, it simply won't power the circuit if it doesn't like them.
#595
JK Newbie
Join Date: Feb 2014
Location: Fort Drum - Dexter, NY
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Yea I used the stock fog lights wires as the signal wire for my piaas. The CANBUS system won't run the lights off of the stock wiring by itself.
#596
JK Newbie
sidelight blinker
Works great need to add dtl but other them that it works perfect. I found I need to run mine from the white side of the side marker light because I have
aftermarket fender but that was the only change.... I just did simple test to comfirn the correct wire ... I think it took 20 mins for both sides total easy
change by far.
aftermarket fender but that was the only change.... I just did simple test to comfirn the correct wire ... I think it took 20 mins for both sides total easy
change by far.
The following users liked this post:
paulp575 (01-10-2023)
#598
Works fine with LED turn signals
I just tried this on my 2015 JK when I put in my new led signal lights and it works fine.
Note: No marker light when headlights on, with parking lights only, the markers are on, (I drive this way so my taillights are lit, DRLs fed by ACC bus are on all the time)
Note: No marker light when headlights on, with parking lights only, the markers are on, (I drive this way so my taillights are lit, DRLs fed by ACC bus are on all the time)
Last edited by Hamalot; 01-12-2023 at 04:34 PM.