Notices
JK Electrical, Lighting & Sound Systems Bulletin board forum regarding topics such as stereo head units, CD players, MP3 players, speaker systems, amplifiers, hardmounted GPS devices, computers, headlight upgrades, fog lights, off-road lights, general wiring and anti-theft devices.

Light Switch recomendation for 2012 Rubicon JK with Rubicon Switch Pod

Thread Tools
 
Old 01-09-2012, 02:03 PM
  #1  
JK Newbie
Thread Starter
 
Robp747's Avatar
 
Join Date: Jan 2012
Location: danville, ca
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Light Switch recomendation for 2012 Rubicon JK with Rubicon Switch Pod

I need a suggestion for an on/off switch for my off road lights. I'd like to find a switch that fits into the existing Rubicon switch pod that's located to the lower left of the steering wheel. This pod contains the sway bar disconnect and lockers switches and looks like there's room for 3 more switches. I tried the Dealer; however, they told me there's no Jeep part numbers for a light switch that would fit into the existing pod. Any help and/or suggestions would be appreciated.
Thanks
Old 01-09-2012, 03:26 PM
  #2  
JK Newbie
 
bluewrx78's Avatar
 
Join Date: Sep 2011
Location: San Diego, Ca
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

Where did you find that panel? Looks great.
Old 02-05-2012, 12:57 PM
  #3  
JK Enthusiast
 
blang816's Avatar
 
Join Date: Jan 2012
Location: Houston, Texas
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
Default Hidden Switch

Just added my lights and came up with this great spot for the switch just above the A/C controls. It is nice and hidden but easy access. Real clean.
Attached Thumbnails Click image for larger version

Name:	DSC03667.jpg
Views:	217
Size:	50.0 KB
ID:	274289  

Last edited by blang816; 02-05-2012 at 01:11 PM.
Old 02-05-2012, 01:04 PM
  #4  
JK Enthusiast
 
blang816's Avatar
 
Join Date: Jan 2012
Location: Houston, Texas
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
Default Circuit Board

This isn't from the Rubi switches, intead this is from the center switches where the hazard light button etc. are. I took it apart to see if I could put a switch in, you can but it would have to be very small and you need to be creative and handy. Anyway, I think this will give everyone an idea of what is behind the switches. The bottom piece with the blue is the button's side, the cicuit board goes on top and then the back clips on.
Attached Thumbnails Click image for larger version

Name:	DSC03656.jpg
Views:	169
Size:	44.3 KB
ID:	274296  

Last edited by blang816; 02-05-2012 at 01:12 PM.



Quick Reply: Light Switch recomendation for 2012 Rubicon JK with Rubicon Switch Pod



All times are GMT -8. The time now is 11:40 AM.