Knuckle Offroad rear bumper and tire carrier
#1
JK Super Freak
Thread Starter
Knuckle Offroad rear bumper and tire carrier
Knuckle offroad bumper with vertical tire carrier. Carrier is modified for highlift and better support for the tire
Bumper is in great shape
with two LED lights
$800
Specs
Rear Bumper Specs:
CAD design is CNC cut and bent then hand welded, ground, and sanded to perfection.
3/16" steel body,
1/4" steel mounting bracketry for strength.
Maximum ground clearance for improved departure angles.
Maximum clearance on sides with wrap around body protection.
Easy installation with the use of OEM mounting holes with an additional two holes for strength.
Integrated 3/4" thick d-ring mounts included.
Integrated 2" receiver hitch included.
Includes grade 8 hardware for mounting.
Vertical Tire Carrier Specs:
1-3/4" base diameter spindle, dual tapered roller bearings.
Zerk fitting on spindle for grease to ensure a long trouble free life.
A combination of 1/4"and 3/16” “I” beam design for strength and stability
Two Mounting Configurations conventional (vertical) or slant (designed to work with the angle of the Trektop) with the addition of our “Skewer” bracket.
5/8” Heim Joint link to connect the backing plate to allow for the tire carrier to open and close with the latch on the OEM tailgate.
1 1/4 “ hitch to allow for trail rack or a license plate relocation
Integrated CB antenna Mount
Includes grade 8 hardware
Allows for mounting of a 32”-40” tire with adjustable offset bracket.
Bumper is in great shape
with two LED lights
$800
Specs
Rear Bumper Specs:
CAD design is CNC cut and bent then hand welded, ground, and sanded to perfection.
3/16" steel body,
1/4" steel mounting bracketry for strength.
Maximum ground clearance for improved departure angles.
Maximum clearance on sides with wrap around body protection.
Easy installation with the use of OEM mounting holes with an additional two holes for strength.
Integrated 3/4" thick d-ring mounts included.
Integrated 2" receiver hitch included.
Includes grade 8 hardware for mounting.
Vertical Tire Carrier Specs:
1-3/4" base diameter spindle, dual tapered roller bearings.
Zerk fitting on spindle for grease to ensure a long trouble free life.
A combination of 1/4"and 3/16” “I” beam design for strength and stability
Two Mounting Configurations conventional (vertical) or slant (designed to work with the angle of the Trektop) with the addition of our “Skewer” bracket.
5/8” Heim Joint link to connect the backing plate to allow for the tire carrier to open and close with the latch on the OEM tailgate.
1 1/4 “ hitch to allow for trail rack or a license plate relocation
Integrated CB antenna Mount
Includes grade 8 hardware
Allows for mounting of a 32”-40” tire with adjustable offset bracket.
Last edited by taher2.1; 06-21-2016 at 01:42 PM.