First JK Build, Long Time Jeeper
08-18-2016, 07:09 PM
#22
JK Newbie
Thread Starter
Join Date: May 2016
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
YJ is done for foreseeable future. It's all wrapped up and looking good now. Except head light mounts. Still might spring for the square ones.
In JK news, CB radio, inverter, with any luck some doorless cruising, wrap up skid plate, find dirt and or rocks.
In JK news, CB radio, inverter, with any luck some doorless cruising, wrap up skid plate, find dirt and or rocks.
08-25-2016, 05:19 PM
#23
JK Newbie
Thread Starter
Join Date: May 2016
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Jk update! The winch plate frame tie in test fit up and bolted in. Once I try out the winch I'll pull it off and have it coated.
I also finished the YJ headlights after work today.
Next projects include mounting my CB and Inverter on a double stack rack under the passenger seat. Let's face it the 4 days out of the year you use the CB radio isn't worth having it taking up valuable space in the open overhead, in the console leg room on the passenger side etc. The inverter needs to be tucked out of the way because they are fairly large and mine only gets used occasionally. Updates on that soon.
I also finished the YJ headlights after work today.
Next projects include mounting my CB and Inverter on a double stack rack under the passenger seat. Let's face it the 4 days out of the year you use the CB radio isn't worth having it taking up valuable space in the open overhead, in the console leg room on the passenger side etc. The inverter needs to be tucked out of the way because they are fairly large and mine only gets used occasionally. Updates on that soon.
09-03-2016, 03:19 PM
#26
JK Newbie
Thread Starter
Join Date: May 2016
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts