CB power which fuse
#21
JK Enthusiast
Join Date: Sep 2015
Location: Tavares, Florida
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the heads up on that, I didn't know that and have mine mounted to the tailgate.
#22
JK Enthusiast
Thread Starter
Join Date: Jan 2016
Location: Redlands, Ca
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
#23
JK Enthusiast
Thread Starter
Join Date: Jan 2016
Location: Redlands, Ca
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know if cutting a hole in the red cap will change the SWR in a total bad way. Looks like crap without the red cap and I'm afraid the nut will loosen up with hitting something. I know the cap will change the SWR but wondering if cutting a hole at the tip of the cap will somehow destroy the wave ? Reason I want to cut a hole is its super hard to remove the cap. It forms one mean suction once you push it onto the antenna.
#25
JK Enthusiast
Thread Starter
Join Date: Jan 2016
Location: Redlands, Ca
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
#27
You can use a crescent wrench too, adjust it so its pretty tight on the antenna mast and slide it up, the cap should pop right off. That way you are not pinching or putting any pressure on the cap as you try to remove it.