biggreenjku

I need to replace the tires on my completely stock Jeep before the 5th. Am planing on going to 35s. Will my axles survive for a few months until I can install C gussets? Can my dana 30 axle shafts take 35s if I stay on the road? Lastly, can someone with 3.73 gears, a manual transmission, and a 3.8 share their experience? Any advice is appreciated!

jadmt

1000's if people are running 35's on d30/44's without gussets and without issues. If you beat on it upgrade but if you are like the majority of people and only do easier trails like the Rubicon trail etc you will be fine.

batt75batt75

Been running 35's on my Sahara unlimited for 3 years now. No problems

Texasunlimited

I have them with same gearing but an auto. It's not a powerhouse for sure but very doable. I getting 15 mpg buts that's 80%hwy miles to and from work at 65 to 70 mph.

Sent from my iPhone using JK-Forum

14Sport

I ran 35s on my D30 for about 7K miles before I gusseted. Never had a problem. My off-roading however, is forest road type stuff.

jtphoto JK

Ran 35s and 37s on my D30 for 185,000klm no issues.

jclaytor1

I have been running 35s on my Dana 30 Front and Dana 44 rear for a while now and we go wheeling once or twice a month on some pretty crazy stuff and I haven't had any issues at all.