Urg, Driver ball joint
#1
JK Newbie
Thread Starter
Join Date: Jul 2016
Location: Victoria
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Urg, Driver ball joint
Did the ball joints at 36k km, now again at 136k my driver side joints are shot. Do the synergy/teraflex joints last? I don't wheel hard just logging roads and mild stuff. Should I do just the affected side if I go OEM?
#4
JK Newbie
Thread Starter
Join Date: Jul 2016
Location: Victoria
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#5
Super Moderator
Go synergy or teraflex. The teraflex look to be the best but I went with synergy when I did mine because the teraflex ones were not in production yet. I guess if you plan on going the distance just get them all done at the same time. It seems that the factory ball joints and tie rods have about 30k max on them and sometimes even less depending on tire size and driving habits.
#6
JK Junkie
I would run teraflex. I am running napa gold as when I changed mine out at 20k, teraflex never had them. I am at 195,000 now and my joints are still solid!