2016 JKUR Back to Black- THE DREDGE
08-04-2016, 10:31 AM
#1
JK Enthusiast
Thread Starter
Join Date: Mar 2012
Location: Boca Raton, FL
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
2016 JKUR Back to Black- THE DREDGE
The Dredge
so i will be starting the build with a 2016 JKU Rubicon w/3.73 Gears, Auto , Black Leather Interior, 430 NAV HU, Alpine, Body Color Hardtop and fender flares
ground up
Duratrac 315/70/17
17X9 Xd Machete
TBD brake upgrade. leaning towards Dynatrac PRogrip
Air raid MXP intake
Aev snorkel
TBD exhaust. Hated the drone in my catback gibson on the 2012
Drake hood pins
OME BP51 remote reservoir internal bypass compression/rebound adjustable
Rock Krawler 2.5 Expedition(X factor with taller rear springs) with 3/4 inch spacer up front
Fox 2.0 ATS stabalizer
Griffin Steering Attenuator
(i would appreciate input as to the best alternative to a new driveshaft, ill let the stock ride it out before replacing both drive shafts. which product, spacer or relocation, give for the most clearance?)
smittybuilt XRC Gen 2 front stubby and rear tire carrier. rear tire carrier will mount HiLift and CB antenna. ( i really like the XRC gen 2 for the four corner hi lift jacking points
Smittybuilt SRC tube side step/rub rails.
Smittybuilt X2O-10K Synthetic Rope
Crawler Conceptz Fenders.
Poison Spyder Inner fender liner
JW speaker Headlights and tail lights.
LED fog lights and Turn signals
a few pairs rigid d series midnight optic
Complete interior LINEX
Molle panel overhead with
Uniden Bearcat CB with 3 or 4 foot firestick
amplified PA speaker
hornblasters kit
Molle pouch storage
Molle panel on trunk gate.
Bestop sunrider for hardtop
Hot head headliner
Front and Rear Grab bars
Passenger front grab bar Ram mount for brick of a cellphone
rearview mirror
alpine type R 12inch (non ported box) powered with decent amp
Viair OBA TBD. 2 on 2 gallon will power horn blaster train horns and airing up
that is it for now!
so i will be starting the build with a 2016 JKU Rubicon w/3.73 Gears, Auto , Black Leather Interior, 430 NAV HU, Alpine, Body Color Hardtop and fender flares
ground up
Duratrac 315/70/17
17X9 Xd Machete
TBD brake upgrade. leaning towards Dynatrac PRogrip
Air raid MXP intake
Aev snorkel
TBD exhaust. Hated the drone in my catback gibson on the 2012
Drake hood pins
OME BP51 remote reservoir internal bypass compression/rebound adjustable
Rock Krawler 2.5 Expedition(X factor with taller rear springs) with 3/4 inch spacer up front
Fox 2.0 ATS stabalizer
Griffin Steering Attenuator
(i would appreciate input as to the best alternative to a new driveshaft, ill let the stock ride it out before replacing both drive shafts. which product, spacer or relocation, give for the most clearance?)
smittybuilt XRC Gen 2 front stubby and rear tire carrier. rear tire carrier will mount HiLift and CB antenna. ( i really like the XRC gen 2 for the four corner hi lift jacking points
Smittybuilt SRC tube side step/rub rails.
Smittybuilt X2O-10K Synthetic Rope
Crawler Conceptz Fenders.
Poison Spyder Inner fender liner
JW speaker Headlights and tail lights.
LED fog lights and Turn signals
a few pairs rigid d series midnight optic
Complete interior LINEX
Molle panel overhead with
Uniden Bearcat CB with 3 or 4 foot firestick
amplified PA speaker
hornblasters kit
Molle pouch storage
Molle panel on trunk gate.
Bestop sunrider for hardtop
Hot head headliner
Front and Rear Grab bars
Passenger front grab bar Ram mount for brick of a cellphone
rearview mirror
alpine type R 12inch (non ported box) powered with decent amp
Viair OBA TBD. 2 on 2 gallon will power horn blaster train horns and airing up
that is it for now!
