Rugged Ridge Modular XHD Snorkel Now for both 3.8L and 3.6L V6 2007-2013 - Instock!
#21
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Very fast shipping!! Instructions were great - made the install go almost very smoothly. I highly recommend folks make sure they have the right tools on hand to make the install a breeze. Took me right around 3 hours from start to finish.
One suggestion I have is when permanently fitting the 90 degree elbow to the new air box...install it out of the jeep...then put it in and mate it with the stainless steel connector. You'll know it's in the right place from your test fit, as long as you don't jar it.
Really like this set up and the flexibility between the high and low mount. Great product!!!
Attachment 464359 Attachment 464360 Attachment 464361
One suggestion I have is when permanently fitting the 90 degree elbow to the new air box...install it out of the jeep...then put it in and mate it with the stainless steel connector. You'll know it's in the right place from your test fit, as long as you don't jar it.
Really like this set up and the flexibility between the high and low mount. Great product!!!
Attachment 464359 Attachment 464360 Attachment 464361
#23
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
#26
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Good to hear!
The high mount the intake level is at the top of the windshield roughly. The low mount is just below the windshield (can still use A Pillar light brackets with this, Still higher than stock and further back ) The high mount bolts on top of the low mount (i.e. if you buy the high mount kit you do not have to run the high ram mount.)
Jarod
Jarod
#28
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
High keeps it higher so there is even less chance of water getting in and in theory the air should be cleaner at higher location from dust. But some people do not like the look so they go with the low because it is not as large but still higher than stock.
Jarod
Jarod
#30
Former Vendor
Thread Starter
Join Date: Feb 2013
Location: Albion, IN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
What do you like to do with your Jeep? Do you want A-Pillar Lights? Do you like the look of the High Mount? I personally like the looks of the high mount but would rather have an A-Pillar light I think and I am trying to see if it will fit with my 50" LED light bar I am putting on. I will probably end up with a low mount.