Well I bought a No Spill oil plug by No Spill Systems since my oil plug got messed up by the dealership. They tightened the factory plug too tight and I could not get it off. The install is just like the factory plug, but now the next time and every time after you will not get your hands dirty.
Here is the factory plug it was a pain to try and take off.
Here is the factory and No Spill plug and cap. The washer is for NPT size plugs.
This is the hose that screws in the new plug to drain the oil and plugs.
When you screw the hose on the plug and it pushes this valve up and drains the oil.
Once the oil is drained clean the threads and install the new plug. Hand tighten and then torque to 20 ft lbs.
This is with the hose installed. It is flexible but still stiff.
Once installed put the cap on, change the filter, put new oil in and your done till the next oil change.