This may be a stupid question but I was wondering if it is necessary to gusset the rear axle as well as the front.
If so would I just purchase 2 of the off road evo kits?
Thanks in advance
This may be a stupid question but I was wondering if it is necessary to gusset the rear axle as well as the front.
If so would I just purchase 2 of the off road evo kits?
Thanks in advance
[x]AEM Brute Force Intake
[x]Teraflex 2.5" Budget Boost
[x]Spidertrax 1.5" Wheel Spacers
[x]35x12.50x18 Nitto Mud Grapplers
[x]Smittybilt Oversize Tire Carrier
[x] JKS Quicker Disco's
[x] Cobra 75
[x] Trektop NX
[x] XRC Flat Fenders
[] ACE Rock Rails
[] Gussests & Possibly Sleeves
[] Superchips Flashpaq
Northridge 4x4
APPALACHAIN JEEP TRAIL RUNNERS
I guess it could never hurt to have more strength in the rear axle but....
Not sure which front you have but the D30s are weaker than the D44 in the rear.
Also, the front is where most of the stress is as your wheels turn putting additional stress on the Cs at different approach angles and impact angles, etc, etc.
To bend a rear axle would take a heck of a lot more than a front. If I were you I would not even worry about the rear.
2012 Stone White Sahara JKU---- Teraflex 2.5" coils w/ Bilstein 5100s & JKS discos---- Rough Country Control Arm Relocation Brackets----Auto with 4.10s & OX Rear Locker
Ten Factory Chromoly rear 44s-----35" KM2s on 15" MBTKOs
Rubicon Rails-----Dually Floods w/A-pillar mounts-----HID HL
"Saharacon"
Jeep Add-Ons & Northridge 4x4
Alright cool, I have the D30.
Thanks for the info.![]()
[x]AEM Brute Force Intake
[x]Teraflex 2.5" Budget Boost
[x]Spidertrax 1.5" Wheel Spacers
[x]35x12.50x18 Nitto Mud Grapplers
[x]Smittybilt Oversize Tire Carrier
[x] JKS Quicker Disco's
[x] Cobra 75
[x] Trektop NX
[x] XRC Flat Fenders
[] ACE Rock Rails
[] Gussests & Possibly Sleeves
[] Superchips Flashpaq
Northridge 4x4
APPALACHAIN JEEP TRAIL RUNNERS
No you cannot gusst a rear axle. The gussets are to reinforce the inner c's which are only on the front axle. However, if you are running 37" or larger tires and want to improve the rear axle you can get a truss for it. Many vendors make Dana 44 trusses and they are around $150, plus labor if you don't know how to weld.
info@offroadevolution.com
www.offroadevolution.com
714-870-5515
EV0 MFG- GENRITE OFFROAD-POISON SPYDER-TERAFLEX-ROCKKRAWLER-DYNATRAC
Cool thanks for the responses!
[x]AEM Brute Force Intake
[x]Teraflex 2.5" Budget Boost
[x]Spidertrax 1.5" Wheel Spacers
[x]35x12.50x18 Nitto Mud Grapplers
[x]Smittybilt Oversize Tire Carrier
[x] JKS Quicker Disco's
[x] Cobra 75
[x] Trektop NX
[x] XRC Flat Fenders
[] ACE Rock Rails
[] Gussests & Possibly Sleeves
[] Superchips Flashpaq
Northridge 4x4
APPALACHAIN JEEP TRAIL RUNNERS