Pic/Info request: 2.5" lift with 35's and PSC Rocker Knockers

[hagausaf]

Alright I'm sure there is a thread out somewhere with the answer but I did a search and found nothing so here you go. I have a 2.5" lift with 35" KM2's and am wondering how far do the Poison Spyder Rocker Knockers extend out to the tire. Example below is how far the stock rock rails come to my tire which is too close for comfort so just wondering if the PSC RK's were a decent option as in not extending out as far as my rock rails or if I needed to look elsewhere. Thanks in advance.

Derrick

[codysanders]

Less than your pinch seem sticks out

[hagausaf]

trim the rock rail

ditching the rock rails regardless. Just wondering if the PSC rails stuck out the same or less than the stock rock rails. Need something with a step for the wife who will be prego in the coming months.

[CnoteJK]

they have some decent pics of them on their website. i have a 2.5 lift and 35's right now and the rear gap is scary between the rubi rail and tire... if you wait a week i should have some pics of my brawler rockers once their installed

[hagausaf]

yea saw a few pics on their site, just was wanting some first hand opinions before dropping the 600 bucks on them. Tinkering with the Brawler Knockers as wel

[CnoteJK]

from what i know of their quality (first hand experience) it shouldnt be a problem at all

[codysanders]

like i posted they are less then the pinch seem before it is trimmed. i ran a ome lt lift with 37's and they clear fine no rear control arms. you will need to trim the pinch seam before the rails.

here is a early pic of my jeep with 35's and a trimmed pinch seem with non cut rocker knockers. i am running 38's now and have never had to trim the rocker knockers. you will want to trim or beat your pinch seam down but not the rails.

[jkd3624]

I agree do not. Trim it rock rails. If U go with pcs they will work fine

[AREA 13]

ditching the rock rails regardless. Just wondering if the PSC rails stuck out the same or less than the stock rock rails. Need something with a step for the wife who will be prego in the coming months.

I have this exact setup. The PSC rails stop way before the tire, if I get out at lunch time I wil post a pic. I did cut the pinch seam, otherwise the tire possibly would have hit the pinch seam and ripped the tire. As far a PSC goes for a step for your pregnant wife... Don't do it... leave the stock steps on for now. She will have an even harder time getting into the jeep with the PSC.
My wife is 5'7" and she has a little difficulty getting in. When she was around 9 months she couldnt get into the jeep with the stock rails and we had to take the other SUV when we had errands and stuff.
Just an FYI -

[hagausaf]

problem is I dont have steps on the JK now, just the stock rock rails so need to find something thats both a nice rock slider and step.