LinkBack URL
About LinkBacksCan anybody tell me what a G3F error code is. It says to call Superchips, but their tech line is closed (being it's on the weekend). I just got a Flashpaq unit for my Jeep (2009 JK), and on the initial hookup, it gave me that error code. Did anybody else ever see that code? Is it safe to try again? If it was just a communication error, I'm sure trying again shouldn't be a problem. Any thoughts out there on this? Thanks for any info.
|
|
|
Results 1 to 4 of 4
Thread: Superchips Flashpaq error code
-
05-12-2012, 04:46 PM #1JK Newbie
- Join Date
- May 2011
- Location
- Summerhill, Pa
- Posts
- 35
Superchips Flashpaq error code
-
05-12-2012, 05:49 PM #2JK Freak
- Join Date
- Mar 2011
- Location
- Linden, VA
- Posts
- 523
According to Ron at SuperChips:
"G6F or G3F are caused by not turning the vehicles ignition to the RUN position. Everytime the tuner prompts you too".
So I would start from the begining.
2010 Rubicon Unlimited, Auto, Natural Green, Freedom TopOME Front Springs 2619 * OME Rear Springs 2618 * OME Front Shocks N196 * OME Rear Shocks N198 * JKS F&R Track Bars *AEV Pintlers* GY Duratracs 315/70-17* S/B Front XRC Bumper * S/B Rear XRC Bumper & Tire Carrier * S/B XRC Rock Sliders * Riddler Diff Covers * S/B XRC-10 Comp Winch * JKS rear endlinks * AEV Snorkel * SuperChips * CB Radio*Trans Cooler*J-Spec Front Lower CA's
-
05-13-2012, 04:24 AM #3JK Enthusiast
- Join Date
- Apr 2010
- Location
- Olathe, KS
- Posts
- 120
/\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\ /\
What he said. Dont feel bad though, due to the way the ignition is MANY of us have done this one. ( I say "us" because I did it myself for at least 10 minutes before figuring it out. )Respect few. Fear none.
I can explain it to you, but I cannot understand it for you.
-
05-14-2012, 04:18 AM #4JK Newbie
- Join Date
- May 2011
- Location
- Summerhill, Pa
- Posts
- 35
Thanks. I will give it another try. i didn't want to try again without knowing for sure what the code meant.
-
05-14-2012 04:18 AM JK-Forum
Reply With Quote
