FS: Dynatrac PR44 Unlimited COMPLETE axle - San Diego
#1
JK Enthusiast
Thread Starter
Join Date: Nov 2013
Location: San Diego, CA
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
FS: Dynatrac PR44 Unlimited COMPLETE axle - San Diego
Within the next couple weeks I'll have this out from under the rig.
ProRock44 Unlimited Front Housing:
This will be offered as complete brake to brake assembly. This axles has just been serviced and refreshed in December so EVERYTHING has been replaced internally besides the carrier (I used to run 5.38's... moved to 5.13's and replaced all bearings and seals, knuckles, ball joints.... etc.)
Rubicon E-Locker
5.13 Yukon Ring and Pinion
300mm RCV Shafts
Reid Knuckles
Dynatrac ProSteer Ball Joints
New Timken Unit Bearings
Custom BEEFY AS FVCK raised track bar bracket tabbed for ram assist
Teraflex Big Brake Kit
Tabbed for limiting straps
Adams Driveshaft Included!
$4750 cash picked up. If you want it shipped that's on you but it's definitely doable.
Would like it paid in full (just makes things easier when it's time to go) but willing to take a $2,500 deposit to hold it.
Let me know if you have questions and I'll give you my cell.
ProRock44 Unlimited Front Housing:
This will be offered as complete brake to brake assembly. This axles has just been serviced and refreshed in December so EVERYTHING has been replaced internally besides the carrier (I used to run 5.38's... moved to 5.13's and replaced all bearings and seals, knuckles, ball joints.... etc.)
Rubicon E-Locker
5.13 Yukon Ring and Pinion
300mm RCV Shafts
Reid Knuckles
Dynatrac ProSteer Ball Joints
New Timken Unit Bearings
Custom BEEFY AS FVCK raised track bar bracket tabbed for ram assist
Teraflex Big Brake Kit
Tabbed for limiting straps
Adams Driveshaft Included!
$4750 cash picked up. If you want it shipped that's on you but it's definitely doable.
Would like it paid in full (just makes things easier when it's time to go) but willing to take a $2,500 deposit to hold it.
Let me know if you have questions and I'll give you my cell.
#2
JK Jedi
I'm very interested -- plus I could literally bolt this up w/o needing any additional work since I'm running 5.13s already and rubicon e-locker works for my setup. I don't need the driveshaft tho. Any wiggle room on the price? I'm local and could pickup.
-Mike
-Mike
#3
JK Enthusiast
Thread Starter
Join Date: Nov 2013
Location: San Diego, CA
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Sent you a PM. Thanks Mike.
#5
JK Enthusiast
Thread Starter
Join Date: Nov 2013
Location: San Diego, CA
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Bump. This axle will be out from under the Jeep and available for pick up at Offroad Evolution in Fullerton, CA the 22nd of May.
Dropping the price to $4250 including the Adam's driveshaft.
Dropping the price to $4250 including the Adam's driveshaft.