LED Switch Problem?

Reply Subscribe

Thread Tools

Jul 15, 2011 | 12:29 PM

TXCheney

Thread Starter

JK Enthusiast

Joined: Apr 2011

Posts: 287

Likes: 0

From: Texas

LED Switch Problem?

Just finished wiring up my new KCs and RR Switch pod. When I connected everything to the batter the lights work fine, but the LED on the switch stays on. Problem, oversight on my problem or normal.

As a heads up, while I don't have the lights yet, I did go ahead and run the wires for the other 2 switches on the pod, but did not connect to anything.

Jul 15, 2011 | 12:58 PM

centerfieldr162

JK Freak

Joined: Dec 2009

Posts: 850

Likes: 0

From: Mobile, AL

Quote:

Originally Posted by TXCheney

Just finished wiring up my new KCs and RR Switch pod. When I connected everything to the batter the lights work fine, but the LED on the switch stays on. Problem, oversight on my problem or normal.

As a heads up, while I don't have the lights yet, I did go ahead and run the wires for the other 2 switches on the pod, but did not connect to anything.

The only times my buttons have done this is when the wires are connected to the wrong prongs on the button. Re-check your wires and maybe you'll find the problem

Jul 15, 2011 | 02:20 PM

TXCheney

Thread Starter

JK Enthusiast

Joined: Apr 2011

Posts: 287

Likes: 0

From: Texas

That was it, thanks

Now to aim them after dark.

Jul 15, 2011 | 07:37 PM

MasterG

JK Freak

Joined: Dec 2009

Posts: 701

Likes: 0

From: Quebec, Montreal

Quote:

Originally Posted by TXCheney

Just finished wiring up my new KCs and RR Switch pod. When I connected everything to the batter the lights work fine, but the LED on the switch stays on. Problem, oversight on my problem or normal.

As a heads up, while I don't have the lights yet, I did go ahead and run the wires for the other 2 switches on the pod, but did not connect to anything.

Check this out.. this diagram save me a lot of troubleshooting since those RR switch came without any wiring diagram.