Piggyback fuse issue and no power to Suitech A-pillar switches
 

Forgive my ignorance with this. I've spent hours researching the proper way to attach the wires from the relays to the battery, fuse box, and switches, but nothing seems to be working. I attached the piggyback fuse to the M6 slot, attached the big red connector to the battery, chained all positives together on the switches, and all negatives the same, then turned the key. The switches don't like up, my test light doesn't light, and the 12v charger in the car
https://cimg1.ibsrv.net/gimg/www.jk-...ed53f78f3b.jpg
https://cimg2.ibsrv.net/gimg/www.jk-...c6fe8fbe92.jpg
https://cimg5.ibsrv.net/gimg/www.jk-...8b681b785c.jpg
https://cimg8.ibsrv.net/gimg/www.jk-...bc55e71e58.jpg
https://cimg5.ibsrv.net/gimg/www.jk-...8a556e4c23.jpg
doesn't work when the piggyback is connected. The fuse is unblown.

What am I missing?