Replaced WCM Needs Programmed
Thread Starter
JK Newbie
Joined: Apr 2024
Posts: 3
Likes: 2
From: Youngstown, Ohio
Replaced WCM Needs Programmed
I recently had a plethora of electrical problems with my 15 JKU and i’ve been tackling them as they came my way. I just replaced the WCM and was curious if there’s an alternate route other than the dealership who quoted me $500 to program everything. I have seen things online about the JScan app and I seen that they had an option to program a new WCM but wasn’t sure if it would actually work or not. wouldn’t i need to reprogram my key as well? any advice is helpful at this point
JK Jedi
Joined: Jun 2013
Posts: 11,346
Likes: 2,086
From: Willow Park, TX
No experience programming a WCM with JScan, but they are legit. If they say they have the support to do that then I have no reason to think they can't. I'd agree with Jay, reach out to them for confirmation. If you don't already have JScan, I'd tell you it's a great investment for a mere $50 or whatever the combined BT dongle and license is these days. Well worth the money.
Thread Starter
JK Newbie
Joined: Apr 2024
Posts: 3
Likes: 2
From: Youngstown, Ohio
Thread Starter
JK Newbie
Joined: Apr 2024
Posts: 3
Likes: 2
From: Youngstown, Ohio
No experience programming a WCM with JScan, but they are legit. If they say they have the support to do that then I have no reason to think they can't. I'd agree with Jay, reach out to them for confirmation. If you don't already have JScan, I'd tell you it's a great investment for a mere $50 or whatever the combined BT dongle and license is these days. Well worth the money.
JK Newbie
Joined: Apr 2019
Posts: 1
Likes: 0
From: Romney, IN