IPF 968 to rocker switch help needed
#1
JK Enthusiast
Thread Starter
Join Date: May 2008
Location: Mount Juliet, TN
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
IPF 968 to rocker switch help needed
Hopefully you electrical guys can help me out on this one. I got a set of IPF 968lights that I'm wanting use a rocker switch instead of the supplied switch.
I'm guessing that the yellow wire that splices into the factory lights is the power to the switch, the black with white stripe is the return power to the relay and the other black is the ground. I'm am just guessing on this and would like to know for sure before hooking them up.
I'm guessing that the yellow wire that splices into the factory lights is the power to the switch, the black with white stripe is the return power to the relay and the other black is the ground. I'm am just guessing on this and would like to know for sure before hooking them up.
#5
JK Enthusiast
Thread Starter
Join Date: May 2008
Location: Mount Juliet, TN
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts