GhostRHR slow Form=Function build
#11
JK Newbie
Thread Starter
Join Date: Apr 2016
Location: Virginia Beach, VA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Installed M.O.R.E. Dead Pedal drove over 3k miles in the last 3 weeks and this was a necessary mod that I wish I had done before the long trip!
Also installed a set of GraBars, and Finally I installed the soft top and that was a CHALLENGE I must say! It was SUPER tight since its a brand new jeep and top and it definitely needs to stretch but its on and I can't wait to be able to enjoy this summer with the top down and the doors off! Anyway on to a few pics!
Also installed a set of GraBars, and Finally I installed the soft top and that was a CHALLENGE I must say! It was SUPER tight since its a brand new jeep and top and it definitely needs to stretch but its on and I can't wait to be able to enjoy this summer with the top down and the doors off! Anyway on to a few pics!
#14
Super Moderator
For the headlights, you'll want to grab the adjuster screws from the dealer and your output will be better. I've got the TL and after adding the adjuster screws, it's ridiculously better.
The soft top will stretch, give it a good solid month of opening up with the heat and it'll get easier.
The soft top will stretch, give it a good solid month of opening up with the heat and it'll get easier.
#15
JK Newbie
Thread Starter
Join Date: Apr 2016
Location: Virginia Beach, VA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
For the headlights, you'll want to grab the adjuster screws from the dealer and your output will be better. I've got the TL and after adding the adjuster screws, it's ridiculously better.
The soft top will stretch, give it a good solid month of opening up with the heat and it'll get easier.
The soft top will stretch, give it a good solid month of opening up with the heat and it'll get easier.
#16
Super Moderator
So with stock headlights we're only allowed up and down adjustment but adding the screws for horizontal adjustment helps out quite a bit, particularly with the high power LED lights.
#17
JK Newbie
Thread Starter
Join Date: Apr 2016
Location: Virginia Beach, VA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
GOTCHA! Ok makes a little more sense I guess. I will swing by Jeep at some point this week and pick up the screws. Thanks for the input. I would still Like to get up with you and some other jeepers and check out some builds!
#18
Super Moderator
I'm running SOL testing for another week but then I'll be free. Also looking at doing a run to URE (hopefully) within the month.
#19
JK Newbie
Thread Starter
Join Date: Apr 2016
Location: Virginia Beach, VA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
#20
Super Moderator