GR8WHITE 2.0 (But Actually Silver) (40’s, 8 lugs, stretched)
#122
JK Enthusiast
Thread Starter
Final Wheelbase turned out to 110"
The custom flat belly I built was out of 6061 aluminum and fully recessed allen bolts (3/8" thick main piece) (1/4" thick over oil pan and tranny).
All the work from start to finish turned out to be a full year and a half long project for me. (a one man crew with a lot going on) (got lazy with progress pictures although I have a lot that i didn't post on here but I did on my Instagram: @jkyotacon)
The jeep does ok on the road but not gonna be breaking any 65+mph speed limits
The 4.3:1 Atlas 4 speed is awesome recommend to anyone with a 6 speed trans
Jeep sits very low with about 3.5-4" up travel in the front and about 5.5-6" in the rear
No big surprise here but ended up spending more on the jeep than i had thought/planned. Still less than a brand new stock rubicon.
Only regret so far is not getting sticky tires (red label Krawlers or 43 tsl sx's) but going to fix that soon.
The custom flat belly I built was out of 6061 aluminum and fully recessed allen bolts (3/8" thick main piece) (1/4" thick over oil pan and tranny).
All the work from start to finish turned out to be a full year and a half long project for me. (a one man crew with a lot going on) (got lazy with progress pictures although I have a lot that i didn't post on here but I did on my Instagram: @jkyotacon)
The jeep does ok on the road but not gonna be breaking any 65+mph speed limits
The 4.3:1 Atlas 4 speed is awesome recommend to anyone with a 6 speed trans
Jeep sits very low with about 3.5-4" up travel in the front and about 5.5-6" in the rear
No big surprise here but ended up spending more on the jeep than i had thought/planned. Still less than a brand new stock rubicon.
Only regret so far is not getting sticky tires (red label Krawlers or 43 tsl sx's) but going to fix that soon.
Last edited by GreatWhite JK; 04-04-2018 at 08:15 AM.
#123
JK Enthusiast
Thread Starter
The following users liked this post:
GreatWhite JK (04-29-2018)