Ripp Supercharger Gen 2 Stage 2 kit 3.8L
#1
JK Enthusiast
Thread Starter
Join Date: Jan 2011
Location: Clermont, FL
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Ripp Supercharger Gen 2 Stage 2 kit 3.8L
Jeep Wrangler JK 3.8L 07-11 Ripp Supercharger Kit Gen 2 Stage 2 full/complete kit.
This is the complete kit ready to install on your Jeep. Supercharger has approximately 50K miles of use. The Vortech V3 oil was changed every 8K miles as stated by the previous owner. Checked the oil and it is a nice clean red.
Kit includes the following: Vortech V3 supercharger, Intercooler and all piping/couplers, Bypass valve (In great condition, seals are good. It will hold the valve open with your finger covering the vacuum nozzle), all mounting brackets, brand new set of bolts/hardware from Ripp, all clamps needed, larger Ripp fuel injuectors (Fuel injector seals are in good condition), Ripp MAP sensor, new Ripp NGK spark plugs, new Evap T-fitting and line to attach to bypass valve, new Ripp K&N filter with vacuum fitting and line installed, New Gates belt (Not in picture), Diablosport Tuner that is unlocked with a Ripp tune, an extra bottle of Vortech supercharger oil. Edit: Just bought a Ripp Diablosport Intune RM2000 and new idler bearing to include with purchase.
Again this is a complete ready to install kit. I originally purchased this kit from it's original owner with intentions of installing it on my Jeep. However, my Jeep now has steering issues and I am selling this kit to upgrade my entire steering system. (Need to steer more than add horsepower). At the time, I purchased the kit with many missing components. I called Ripp and ordered all of the missing parts.
Selling for $3,000. I will ship if needed.
Located in the Orlando area.
Pictures below.
This is the complete kit ready to install on your Jeep. Supercharger has approximately 50K miles of use. The Vortech V3 oil was changed every 8K miles as stated by the previous owner. Checked the oil and it is a nice clean red.
Kit includes the following: Vortech V3 supercharger, Intercooler and all piping/couplers, Bypass valve (In great condition, seals are good. It will hold the valve open with your finger covering the vacuum nozzle), all mounting brackets, brand new set of bolts/hardware from Ripp, all clamps needed, larger Ripp fuel injuectors (Fuel injector seals are in good condition), Ripp MAP sensor, new Ripp NGK spark plugs, new Evap T-fitting and line to attach to bypass valve, new Ripp K&N filter with vacuum fitting and line installed, New Gates belt (Not in picture), Diablosport Tuner that is unlocked with a Ripp tune, an extra bottle of Vortech supercharger oil. Edit: Just bought a Ripp Diablosport Intune RM2000 and new idler bearing to include with purchase.
Again this is a complete ready to install kit. I originally purchased this kit from it's original owner with intentions of installing it on my Jeep. However, my Jeep now has steering issues and I am selling this kit to upgrade my entire steering system. (Need to steer more than add horsepower). At the time, I purchased the kit with many missing components. I called Ripp and ordered all of the missing parts.
Selling for $3,000. I will ship if needed.
Located in the Orlando area.
Pictures below.
Last edited by ucfjeep; 10-01-2017 at 07:19 AM.
#2
JK Enthusiast
Thread Starter
Join Date: Jan 2011
Location: Clermont, FL
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Picked up a brand new Ripp Diablosport Intune RM2000 and Idler Bearing from Ripp to go with the kit.
This is a complete kit for $2,388 off the new cost.
This is a complete kit for $2,388 off the new cost.
#3
JK Enthusiast
Join Date: Apr 2010
Location: Lahaina, Hawaii
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
#7
Any idea of the brand and part number of the fuel injectors and map sensor used on this kit? I've secured the supercharger but need to cobble together the rest and these are the wild cards for me.