Installed Diabolical Slipstream on my JK
https://cimg7.ibsrv.net/gimg/www.jk-...e38c2ed1e.jpeg Very secure packaging https://cimg8.ibsrv.net/gimg/www.jk-...55230e2f9.jpeg Took about 4 hours, spent an hour and a half on the wall, finally figured out I had the center section upside down.😡 https://cimg9.ibsrv.net/gimg/www.jk-...7cd7f0905.jpeg Removed carpet https://cimg0.ibsrv.net/gimg/www.jk-...66e4114d8.jpeg Ended up flipping the rear tail skin down https://cimg1.ibsrv.net/gimg/www.jk-...3a399c663.jpeg Probably will repaint the hold down brackets https://cimg2.ibsrv.net/gimg/www.jk-...1fdcd5cf0.jpeg Still has some extra room behind the front seats https://cimg3.ibsrv.net/gimg/www.jk-...9b79bb939.jpeg Nice easy lockable access door behind my seats in the middle. |
Started to go through the boxes of take offs from the previous owner and learned how to take off the Hard top.
https://cimg3.ibsrv.net/gimg/www.jk-...60382ed79f.jpg Day 1 with all of the goodies that came with the sale https://cimg8.ibsrv.net/gimg/www.jk-...d62f2f440e.jpg |
After thinking about it for the last few years, I finally got around to relocating my license plate to the spare tire. My plan is to add a pair of Dually cubes or a short light bar above the plate as an additional rear-facing scene light.
https://cimg9.ibsrv.net/gimg/www.jk-...661aba0a49.jpg |
Just had the PSC rear crossmember put on. It had been sitting in my garage in a box forever so I figured I should just make an appointment and get one thing done.
https://live.staticflickr.com/65535/...33d454ae_b.jpg |
Cross member looks good :thumbsup: I get concerned from time to time running a skinny bumper without a cross member.
Technically, this hasn't been done yet, but sneak peek of what's in my garage and should be under the jeep next week - https://lh3.googleusercontent.com/-0...2019-10-07.jpg PR44 with hub conversion paired with full float PR60. :clap: :ya: I'm sure I'll get ragged for not doing front 60, but :broke: |
https://cimg9.ibsrv.net/gimg/www.jk-...bba184bac4.jpg
New Hood installed and painted. |
35’s and fenders today!
From the day I bought it to today!
https://cimg6.ibsrv.net/gimg/www.jk-...5cde3ef41.jpeg https://cimg8.ibsrv.net/gimg/www.jk-...c0ebdf113.jpeg |
Originally Posted by TEV
(Post 78565)
Got this idea off another forum. It was a pretty cool thread to scroll through and I decided we needed a JK version.
So post up what you did to your JK each week. Big mods or little mods we want to see them. :D https://cimg8.ibsrv.net/gimg/www.jk-...fe6ca93429.jpg |
New Jeep camera additions
I retired last month (mandatory) and have found myself with some new free time. Since winter is when I get the Jeep out I've started in on a few mods. The first was adding some fuel capacity. I already had the AEV rear bumper so I added the tire carrier and the 10.5Gal fuel caddy. I like it. I especially like that all the weight has bee transferred to the frame and not to the back door.
https://cimg6.ibsrv.net/gimg/www.jk-...de2960bd0d.jpg Now I only run 33's but having the fuel caddy is like have 42's back there and completely wiped out my rear view so I decided to add a camera and a 430 RGB stereo. I run a couple of different GPS devices and decided I didn't need that built in capability. The 430 GBZ was a brand new unit that I paid $295 for. I also grabbed a used UConnect box and harness off of Ebay for less than a $100 bucks, the camera and cable were $25 bucks. I also ordered a rear-view/reversing camera that mounted at the license plate light. It took about 3 hours to run the wires and swap out the 130 for the 430. I have a J-Scan so the setting up the computer took less than five minutes. During testing of the units I found that I had neglected to clip the harness to set it for NTSC. I also found that the UConnect box did not like the microphone extension.so I used the plug on the harness. Once everything was working I buttoned it all up. Now for just over $400 bucks I have a working backup camera and handsfree calling. https://cimg0.ibsrv.net/gimg/www.jk-...89595ed073.jpg https://cimg0.ibsrv.net/gimg/www.jk-...bce9ffa40e.jpg https://cimg7.ibsrv.net/gimg/www.jk-...f37c1e794a.jpg q |
I added some Weathertech Wind Deflectors.
https://cimg7.ibsrv.net/gimg/www.jk-...14ee2bfc4.jpeg https://cimg8.ibsrv.net/gimg/www.jk-...1e1269c19.jpeg |
All times are GMT -8. The time now is 07:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands