When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
JK TalkGeneral discussion forum regarding thoughts, opinions and rumors about the Jeep JK Wrangler or related subjects that don't quite fit in the Modified, Stock or Electronics forums.
So i bought this flip key off ebay, had it cut and programmed. Works great actually.
The third button which is blank im assuming is for remote start.
Since my jeep is manual, its pretty much worthless.
Anyone know if this can be programmed to do anything else?
No, there was one that i believed used the old circuit board but didnt like the triangular look and rubber button
this one u have to program using 2 exisiting keys
pretty easy.
1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, Turn the ignition switch to the LOCK position and remove the first key.
2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key.
3. Insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position.within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for seconds and then turn off.
The new key is now programmed. The Remote Keyless Entry transmitter will also be programmed during this procedure.
I bought one yesterday too. We'll find out shortly if it works or if we just padded the OP's pocket a bit.
For the cost, I'll gamble!
Originally Posted by Rednroll
I've grown so accustomed to the ugliness, anything different just doesn't look right to me.
I think I'm from the microgeneration that appreciates switchblade keys. All the functionality without any of the pokey bits in your pocket. If they made a horribly triangular flip key.... I might try that
02-27-2019, 02:07 PM
JKU Flip Key i bought off ebay
