rock7174

I have a 2016 JKU with aftermarket fuel wheels with 35's. The previous owner had shut off tpms with a Procal. I turned it back on and none of the sensors will sync with the TPMS system. I dismounted the wheel and found they are Autel 433hz sensors. I have a scan tool that will tell me if sensor is active but won't program the sensor. The sensors are active, but my question is do I have to take it somewhere to have the TPMS retrained for the new sensor specific ID's? These won't "self learn" without being programmed correct?

jadmt

not familiar with Autel sensors but OEM sensors which are Schrader self learn after a few miles at above 15mph. I have swapped several times over the years and the schraders have always started working fairly quickly.

jadmt

just looked up autel sensors and looks like you need a scanner to program them.

ronjenx

Ask a tire shop what they would charge to program your sensors. It may be cheaper than the dealer.

rock7174

will do thanks!