Hollidizzle

Here are mine. Super strong and easy.....like a female German bodybuilder. 80 bucks

Thumper291

What do you put on the door hinges when you put the doors back on.

Stillmotion

I toss a little grease on mine just to make sure its not difficult to get them off the next time.

Kaila

X2 on the grease.

AtotheJ

I just built these, I gotta say, FANTASTIC design! Thank you! so much better than leaning them against the wall and holding them up with hopes and dreams. I took some velcro and hung it on the wall to hang my windows when they were off too so they are up off the floor.

And I just happened to talk to one of the guys at Home Depot when I was picking up the PVC and told him what I was building, turns out he was a fellow Jeeper himself and cut all the PVC for me right there! (despite their policy of not cutting PVC)

Thanks again for sharing the design and measurements!!

oriffx

One word...awesome. I have to do this. Thanks for the write-up.

yamil008

This is an awesome idea. I'm going to do this tomorrow!

Thanks for the write-up

Kaila

Glad y'all like it! I've since added 1/2" PVC on the bottom to keep the doors from sliding off and hitting the ground.

bushpilot

my door stand (ive got a 2 door).

Is built to sit on a 15 dollar 4 wheel furniture dolly.
Contact points will be padded w/ pipe insulation or weather strip foam (stick on).



I used one of those 165 dollar example as a model / idea....with some modification....to permit folding.
Being able to folding the stand means its more easily stored or packed in the back of the jeep, corner of the garage or basement storage of our motorcoach.

oriffx

Ok...here's my version