ebp 99 si

I was wondering if anyone knew who makes a 1.5" lift rear coil spring for the JK. I'm getting ready to pull the plug and order the 8" rear stretch kit from poly performance ( https://www.polyperformance.com/syne...-8-stretch-kit ) and it says to use a spring thats 2" shorter than the front. I plan on running a 3.5" spring in the front and a 1.5" spring in the rear with 40s. If anyone can point me in the right direction, I'd appreciate it.

lowendrider

Rock Krawler has rear springs advertised to be 1.5" for the rear.

ebp 99 si

i thought those were for a 4dr, which would make it 2.5" on a 2dr. ill have to call and find out

Rock Krawler Suspension

Correct, the 1.5 4 door springs are 2.5 on a 2 door. We don't have a 2 door 1.5 spring. I don't know of anyone that does. You can go 4.5 front 2.5 rear.

Adam C

jadmt

I thought teraflex did or how about a stock rear coil from a recon or 10A

ebp 99 si

I may end up going that route and running a 41.5x13.50 pitbull rocker radial

TheDirtman

I would just wait on rear coils until you have everything set up and determine your ride height. You don't have to buy a JK coil, just one that has the length and coil rate you need.